Mako G-131

Mako G-131

  • Ultra-compact design
  • Teledyne e2v Sapphire CMOS sensor
  • Switchable shutter modes
  • 62 fps @ full resolution

Mako G-131

GigE Vision camera with Teledyne e2v Sapphire sensor; 62 frames per second

Mako G-131B/G-131C is a GigE machine camera that incorporates the high quality Type 1/11.8 (8.7 mm diagonal) Teledyne e2v Sapphire EV76C560 CMOS sensor. At full resolution, this camera runs 62 frames per second. With a smaller region of interest, higher frame rates are possible. Mako G cameras have the same ultra-compact form factor and the same mounting positions as many analog cameras. All models include Power over Ethernet (PoE), three opto-isolated outputs, and a 64 MByte image buffer. The image quality profits from the precisely aligned sensor. By default monochrome models ship with no optical filter and color models ship with IRC Hoya C-5000 IR cut filter.

Feature Specification
Mako G-131B Mako G-131C
Resolution 1280 (H) x 1024 (V) 1.3 MP
Sensor Teledyne e2v EV76C560
Sensor type CMOS
Shutter type Global, Global Reset, and Rolling
Sensor size Type 1/1.8 8.7 mm diagonal
Pixel size 5.3μmx5.3μm
Lens mount Standard: C-Mount Optional: See the Modular Concept
Optical filter Standard: No optical filter Optional: See the Modular Concept Standard: Hoya C-5000 IR cut filter Optional: See the Modular Concept
Maximum frame rate at full resolution 62 frames per second
Maximum image bit depth 10-bit
Image buffer 64 MB
StreamHoldCapacity Up to 50 frames at full resolution
Monochrome formats Mono8, Mono10 Mono8
Color formats (YUV) n/a YUV411Packed, YUV422Packed, YUV444Packed
Color formats (RGB) n/a RGB8Packed, BGR8Packed
RAW formats n/a BayerBG8, BayerBG10
Exposure time control Pixel format Global shutter mode Global Reset shutter mode Rolling shutter mode
Mono8, Mono10, BayerBG8, BayerBG10, YUV411Packed, YUV422Packed 12 μs to 1.012 s; 1 μs increments 12 μs to 0.978 s; 1 μs increments 12 μs to 0.994 s; 1 μs increments
RGB8Packed, BGR8Packed, YUV444Packed 12 μs to 2.124 s; 1 μs increments 12 μs to 2.053 s; 1 μs increments 12 μs to 2.086 s; 1 μs increments
Gain control 0 to 24 dB; 1 dB increments
Binning1 Horizontal: 1 to 2 pixels
Vertical: 1 to 2 rows
Teledyne e2v sensors support 1×1 and 2×2 binning
Decimation Horizontal and Vertical: 1, 2, 4, 8 factor
Opto-isolated I/Os 1 input, 3 outputs
Voltage requirements 12 to 24 VDC; PoE
Power consumption 2.0W@12VDC;2.2WPoE
Trigger latency2 Idle state: 32.6 μs; Frame valid state: 32.6 μs
Trigger jitter2 Idle state: ±8.1 μs; Frame valid state: ±8.1 μs
Operating temperature +5°C to +45°C housing temperature
Storage temperature -10°C to +70°C ambient temperature (without condensation)
Body dimensions (L x W x H) 60.5 x 29.2 x 29.2 mm
Mass (typical) 80g
Interface IEEE 802.3 1000BASE-T (Gigabit Ethernet), IEEE 802.3af (PoE)
Interface standard GigE Vision Standard V1.2
Camera control standard GenICam SFNC V1.2.1
Regulations CE, RoHS, REACH, WEEE, FCC, ICES
Temperature monitoring Available for main board only. Resolution: 0.031; Accuracy: ± 1 °C
1 The Mako G-131B, G-131C supports BinningHorizontalMode = Sum or Average and BinningVerticalMode = Sum or Average.

2 These values are calculated directly from the microcontroller source. These values are only valid for pixel formats < 16 bits per pixel and applicable in both Idle and Frame valid states:
• Idle state: sensor is ready and camera is idle, waiting for the next trigger.
• Frame valid state: sensor is reading out and camera is busy. If next frame is requested by an external trigger in

this state, higher latency may occur as compared to the Idle state.
• The Teledyne e2v sensor does not support exposure duration via external level trigger.

Image optimization features:

  • Auto gain (manual gain control: 0 to 24 dB, 1 dB increments)
  • Auto exposure (exposure time control varies by pixel format)
  • Auto white balance (color models only)
  • Binning (1×1 and 2×2 binning)
  • Color correction, hue, saturation (color models only)
  • Decimation
  • Gamma correction
  • Look-up table (LUT) (1)
  • Pixel defect masking
  • Region of interest (ROI), separate ROI for auto features
  • Reverse X/Y

Camera control features:

  • Event channel
  • Image chunk data
  • Storable user sets
  • StreamBytesPerSecond (easy bandwidth control)
  • Stream hold
  • Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
  • Switchable Rolling / Global / GlobalReset shutter modes
  • Temperature monitoring (main board only)

Area Scan Camera Finder

Camera Finder

Use the Area Scan Camera Finder to find the camera you are looking for quickly.

Line Scan Camera Finder

linescan Finder round 220 pix

Use the Line Scan Camera Finder to find the linescan camera for you quickly.

Machine Vision Lens Finder

Use the Machine Vision Lens Finder to find the lens  you are looking for quickly.

Machine Vision Lighting Finder

Use the Lighting Finder to find the Lighting  you are looking for quickly.

Help-Desk