Mako G-223

Mako G-223

  • Ultra-compact design
  • Affordable
  • Power over Ethernet
  • CMOSIS/ams CMV2000 sensor

Mako G-223

GigE camera with CMOSIS/ams CMV2000 sensor, global shutter; 49.5 frames per second

Mako G-223B/G-223C is a GigE machine vision camera that incorporates the high quality Type 2/3 (12.7 mm diagonal) CMOSIS/ams CMV2000 CMOS sensor. At full resolution, this camera runs 49.5 frames per second. With a smaller region of interest, higher frame rates are possible. Mako G cameras have the same ultra-compact form factor and the same mounting positions as many analog cameras. All models include Power over Ethernet (PoE), three opto-isolated outputs, and a 64 MByte image buffer. The image quality profits from the precisely aligned sensor. By default monochrome models ship with no optical filter and color models ship with IRC Hoya C-5000 IR cut filter.

Feature Specification
Mako G-223B, G-223B NIR Mako G-223C
Resolution 2048 (H) x 1088 (V) 2.2 MP
Sensor CMOSIS/ams CMV2000
Sensor type CMOS
Shutter type Global
Sensor size Type 2/3 12.7 mm diagonal
Pixel size 5.5μmx5.5μm
Lens mount Standard: C-Mount Optional: See the Modular Concept
Optical filter Standard: No optical filter Optional: See the Modular Concept Standard: Hoya C-5000 IR cut filter Optional: See the Modular Concept
Maximum frame rate at full resolution 49.5 frames per second
Maximum image bit depth 12-bit
Image buffer 64 MB
StreamHoldCapacity Up to 29 frames at full resolution
Monochrome formats Mono8, Mono12Packed, Mono12 Mono8
Color formats (YUV) n/a YUV411Packed, YUV422Packed, YUV444Packed
Color formats (RGB) n/a RGB8Packed, BGR8Packed
RAW formats n/a BayerGB8, BayerGB12, BayerGB12Packed
Exposure time control1 30 μs to 153 s; 1 μs increments
Gain control 0 to 26 dB; 1 dB increments
Binning n/a
Decimation n/a
Opto-isolated I/Os 1 input, 3 outputs
Voltage requirements 12 to 24 VDC; PoE
Power consumption 2.4W@12VDC;2.8WPoE
Trigger latency Please contact support for more information.
Trigger jitter Please contact support for more information.
Operating temperature +5°C to +45°C housing temperature
Storage temperature -10°C to +70°C ambient temperature (without condensation)

Image optimization features:

  • Auto gain (manual gain control: 0 to 26 dB; 1 dB increments)
  • Auto exposure (manual exposure control: 30 µs to 153 s; 1 µs increments)
  • Auto white balance (color models only)
  • Color correction, hue, saturation (color models only)
  • Column defect masking
  • Gamma correction
  • Look-up table (LUT) (1)
  • Piecewise Linear HDR mode
  • Region of interest (ROI), separate ROI for auto features

Camera control features:

  • Event channel
  • Image chunk data
  • Storable user sets
  • StreamBytesPerSecond (easy bandwidth control)
  • Stream hold
  • Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
  • Temperature monitoring (main board only)

Area Scan Camera Finder

Camera Finder

Use the Area Scan Camera Finder to find the camera you are looking for quickly.

Line Scan Camera Finder

linescan Finder round 220 pix

Use the Line Scan Camera Finder to find the linescan camera for you quickly.

Machine Vision Lens Finder

Use the Machine Vision Lens Finder to find the lens  you are looking for quickly.

Machine Vision Lighting Finder

Use the Lighting Finder to find the Lighting  you are looking for quickly.

Help-Desk