Mako G-30

Mako G-30

  • CMOSIS/ams CMOS sensor
  • Piecewise Linear HDR feature
  • High Frame rate
  • Ultra-compact design

Mako G-30

Machine vision camera with CMOSIS/ams CMV300 CMOS sensor; 309 frames per second

Mako G-030B/G-030C is a GigE machine vision camera that incorporates the high quality Type 1/3 (5.9 mm diagonal) CMOSIS/ams CMV300 CMOS sensor. At full resolution, this camera runs 309 frames per second. With a smaller region of interest, higher frame rates are possible. Mako G cameras have the same ultra-compact form factor and the same mounting positions as many analog cameras. All models include Power over Ethernet (PoE), three opto-isolated outputs, and a 64 MByte image buffer. The image quality profits from the precisely aligned sensor. By default monochrome models ship with no optical filter and color models ship with IRC Hoya C-5000 IR cut filter.

Feature Specification
Mako G-030B Mako G-030C
Resolution 644 (H) x 484 (V) 0.3 MP
Sensor CMOSIS/ams CMV300-3E7M1WP CMOSIS/ams CMV300-3E7C1WP
Sensor type CMOS
Shutter type Global
Sensor size Type 1/3
5.9 mm diagonal
Pixel size 7.4μmx7.4μm
Lens mount Standard: C-Mount Optional: See the Modular Concept
Optical filter Standard: No optical filter Optional: See the Modular Concept Standard: Hoya C-5000 IR cut filter Optional: See the Modular Concept
Maximum frame rate at full resolution 309 frames per second
Maximum image bit depth 12-bit
Image buffer 64 MB
StreamHoldCapacity Up to 99 frames at full resolution
Monochrome formats Mono8, Mono12Packed, Mono12 Mono8
Color formats (YUV) n/a YUV411Packed, YUV422Packed, YUV444Packed
Color formats (RGB) n/a RGB8Packed, BGR8Packed
RAW formats n/a BayerRG8, BayerRG12Packed, BayerRG12
Exposure time control 83 μs to 2 s; 1 μs increments
Gain control 0 to 26 dB; 1 dB increments
Binning n/a
Decimation Horizontal and Vertical: 1, 2, 4 factor
Opto-isolated I/Os 1 input, 3 outputs
Voltage requirements 12 to 24 VDC; PoE
Power consumption 2.1W@12VDC;2.3WPoE
Trigger latency1 Idle state: 3.1 μs; Frame valid state: 3.1 μs
Trigger jitter1 Idle state: ±1.2 μs; Frame valid state: ±3.1 μs
Operating temperature +5 °C to +45 °C housing temperature
Storage temperature -10°C to +70 °C ambient temperature (without condensation)
Operating humidity 20 to 80% non-condensing
Body dimensions (L x W x H) 60.5 x 29.2 x 29.2 mm
Mass (typical) 80g
Interface IEEE 802.3 1000BASE-T (Gigabit Ethernet), IEEE 802.3af (PoE)
Interface standard GigE Vision Standard V1.2
Camera control standard GenICam SFNC V1.2.1
Regulations CE, RoHS, REACH, WEEE, FCC, ICES
Temperature monitoring Available for main board only. Resolution: 0.031; Accuracy: ± 1 °C

Image optimization features:

  • Auto gain (manual gain control: 0 to 26 dB; 1 dB increments)
  • Auto exposure (manual exposure control: 83 µs to 2 s; 1 µs increments)
  • Auto white balance (color models only)
  • Color correction, hue, saturation (color models only)
  • Decimation
  • Gamma correction
  • Look-up table (LUT) (1)
  • Piecewise Linear HDR mode
  • Pixel defect masking
  • Region of interest (ROI), separate ROI for auto features
  • Reverse X/Y

Camera control features:

  • Event channel
  • Image chunk data
  • Storable user sets
  • StreamBytesPerSecond (easy bandwidth control)
  • Stream hold
  • Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
  • Temperature monitoring (main board only)

Area Scan Camera Finder

Camera Finder

Use the Area Scan Camera Finder to find the camera you are looking for quickly.

Line Scan Camera Finder

linescan Finder round 220 pix

Use the Line Scan Camera Finder to find the linescan camera for you quickly.

Machine Vision Lens Finder

Use the Machine Vision Lens Finder to find the lens  you are looking for quickly.

Machine Vision Lighting Finder

Use the Lighting Finder to find the Lighting  you are looking for quickly.

Help-Desk