Mako G-32

Mako G-32

  • Ultra-compact design
  • Affordable
  • Power over Ethernet
  • High frame rate

Mako G-32

GigE camera with Sony ICX424 CCD sensor, 102.3 frames per second

Mako G-032B/G-032C is a GigE machine vision camera that incorporates the high quality Type 1/3 (6.0 mm diagonal) Sony ICX424 CCD sensor with HAD technology. At full resolution, this camera runs 102.3 frames per second. With a smaller region of interest, higher frame rates are possible. Mako G cameras have the same ultra-compact form factor and the same mounting positions as many analog cameras. All models include Power over Ethernet (PoE), three opto-isolated outputs, and a 64 MByte image buffer. The image quality profits from the precisely aligned sensor. By default monochrome models ship with no optical filter and color models ship with IRC Hoya C-5000 IR cut filter.

Feature Specification
Mako G-032B Mako G-032C
Resolution 658 (H) x 492 (V) 0.3 MP
Sensor Sony ICX424AL with HAD CCDTM technology Sony ICX424AQ with Wfine HADCCDTM technology
Sensor type Interline CCD, Progressive Scan
Shutter type Global
Sensor size Type 1/3
6.0 mm diagonal
Pixel size 7.4μmx7.4μm
Lens mount Standard: C-Mount Optional: See the Modular Concept
Optical filter Standard: No optical filter Optional: See the Modular Concept Standard: Hoya C-5000 IR cut filter Optional: See the Modular Concept
Maximum frame rate at full resolution 102.3 frames per second
Maximum image bit depth 12-bit
Image buffer 64 MB
StreamHoldCapacity Up to 202 frames at full resolution
Monochrome formats Mono8, Mono12Packed, Mono12 Mono8
Color formats (YUV) n/a YUV411Packed, YUV422Packed, YUV444Packed
Color formats (RGB) n/a RGB8Packed, BGR8Packed
RAW formats n/a BayerRG8, BayerRG12, BayerRG12Packed
Exposure time control 10 μs to 93 s; 1 μs increments
Gain control 0 to 30 dB; 1 dB increments
Binning Horizontal: 1 to 8 columns Vertical: 1 to 14 rows
Decimation n/a
Opto-isolated I/Os 1 input, 3 outputs
Voltage requirements 12 to 24 VDC; PoE
Power consumption 2.4W@12VDC;2.8WPoE
Trigger latency1 Idle state: 7.2 μs; Frame valid state: 16.9μs
Trigger jitter1 Idle state: ±4.0 μs; Frame valid state: ±13.7 μs
Operating temperature +5 °C to +45 °C housing temperature
Storage temperature -10°C to +70°C ambient temperature (without condensation)
Operating humidity 20 to 80% non-condensing
Body dimensions (L x W x H) 60.5 x 29.2 x 29.2 mm
Mass (typical) 80g
Interface IEEE 802.3 1000BASE-T (Gigabit Ethernet), IEEE 802.3af (PoE)
Interface standard GigE Vision Standard V1.2
Camera control standard GenICam SFNC V1.2.1
Regulations CE, RoHS, REACH, WEEE, FCC, ICES
Temperature monitoring Available for main board only. Resolution: 0.031; Accuracy: ± 1 °C
1 It is possible to start the exposure of next frame while previous frame is read out:

• Idle state: sensor is ready and camera is idle, waiting for the next trigger.

• Frame valid state: sensor is reading out and camera is busy. If next frame is requested by an external trigger in
this state, higher latency may occur as compared to the Idle state.

Image optimization features:

  • Auto gain (manual gain control: 0 to 30 dB; 1 dB increments)
  • Auto exposure (manual exposure control: 10 µs to 93 s; 1 µs increments)
  • Auto white balance (color models only)
  • Binning
  • Color correction, hue, saturation (color models only)
  • Gamma correction
  • Look-up table (LUT) (1)
  • Region of interest (ROI), separate ROI for auto features

Camera control features:

  • Event channel
  • Image chunk data
  • Storable user sets
  • StreamBytesPerSecond (easy bandwidth control)
  • Stream hold
  • Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
  • Temperature monitoring (main board only)

Area Scan Camera Finder

Camera Finder

Use the Area Scan Camera Finder to find the camera you are looking for quickly.

Line Scan Camera Finder

linescan Finder round 220 pix

Use the Line Scan Camera Finder to find the linescan camera for you quickly.

Machine Vision Lens Finder

Use the Machine Vision Lens Finder to find the lens  you are looking for quickly.

Machine Vision Lighting Finder

Use the Lighting Finder to find the Lighting  you are looking for quickly.

Help-Desk