Allied Vision Manta G-282
GigE camera with Sony ICX687 CCD sensor
Main > Product > Area Scan camera > GigE Cameras > Allied Vision GigE Cameras > AVT Manta Series > AVT Manta G-282
Allied Vision Manta G-282
Manta G-282B/G-282C is a machine vision camera that incorporates the high quality Type 1/1.8 (8.918 mm diagonal) Sony ICX687 CCD sensor with EXview HAD II technology. This sensor has the same resolution as the ICX674 at a more cost-effective price level. At full resolution, this camera runs 30.4 frames per second. With a smaller region of interest, higher frame rates are possible. The Manta is one of Allied Vision’s versatile GigE Vision cameras with a wide range of features. Particular highlights are the three look-up tables, sophisticated color correction capabilities, a robust metal housing, and many modular options. By default monochrome models ship with protection glass B 270 (ASG) and color models ship with an IRC Hoya C-5000 IR cut filter.
Image optimization features:
- Auto gain (manual gain control: 0 to 32 dB; 1 dB increments)
- Auto exposure (41 µs to 38 s; 1 µs increments)
- Auto white balance (color models only)
- Binning
- Black level (offset)
- Color correction, hue, saturation (color models only)
- Decimation
- Gamma correction
- Look-up tables (LUTs) (3)
- Region of interest (ROI), separate ROI for auto features
Camera control features:
- Auto-iris (video type)
- Event channel
- Image chunk data
- IEEE 1588 Precision Time Protocol
- Storable user sets
- StreamBytesPerSecond (easy bandwidth control)
- Stream hold
- Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
- Tap mode switchable in Vimba Viewer 2.0 or later (two-tap, one-tap)
- Temperature monitoring (main board)
- Trigger over Ethernet (ToE) Action Commands
| Manta G-282B | Manta G-282C |
|
|---|---|---|
| Resolution | 1936 (H) × 1458 (V) 2.8 MP | |
| Sensor | Sony ICX687ALA with EXview HAD CCD II Technology | Sony ICX687AQA with EXview HAD CCD II Technology |
| Sensor type | Interline CCD, Progressive Scan | |
| Shutter type | Global | |
| Sensor size | Type 1/1.8 8.918 mm diagonal | |
| Pixel size | 3.69 μm × 3.69 μm | |
| Lens mount | Standard: C-Mount Optional: See the Modular Concept | |
| Housing | Standard: Straight view Optional: See the Modular Concept | |
| Optical filter | Protection glass B 270 (ASG) Optional: See the Modular Concept | IRC Hoya C-5000 IR cut filter Optional: See the Modular Concept |
| Maximum frame rate at full resolution | 30.4 frames per second (dual-tap mode) | |
| Maximum image bit depth | 12-bit | |
| Image buffer | 128 MB | |
| StreamHoldCapacity | Up to 47 frames at full resolution | |
| Monochrome formats | Mono8, Mono12, Mono12Packed | Mono8 |
| Color formats (YUV) | n/a | YUV411Packed, YUV422Packed, YUV444Packed |
| Color formats (RGB) | n/a | RGB8Packed, BGR8Packed, RGBA8Packed, BGRA8Packed |
| RAW formats | n/a | BayerRG8, BayerRG12 |
| Exposure time control | 41 μs to 38 s; 1 μs increments | |
| Gain control | 0 to 32 dB; 1 dB increments | |
| Binning | Horizontal: 1 to 8 columns Vertical: 1 to 14 rows | |
| Decimation | Horizontal and Vertical: 1, 2, 4, 8 factor | |
| Sensor taps | Dual-tap Single-tap switchable in Vimba Viewer 2.0 or later | |
| Opto-isolated I/Os | 2 inputs, 2 outputs | |
| RS232 | 1TxD,1RxD | |
| Voltage requirements | 8to30VDC;PoE | |
| Power consumption | 3.5W@12VDC 4.1 W PoE | |
| Trigger latency | Idle state: 7.2 μs; Frame valid state: 18.4 μs | |
| Trigger jitter | Idle state: ±4.0 μs; Frame valid state: ±15.2 μs | |
| Operating temperature | +5°C to +45°C ambient temperature (without condensation) | |
| Storage temperature | -10°C to +70°C ambient temperature (without condensation) | |
| Body dimensions (L x W x H) | 86.4×44×29mm | |
| Mass (typical) | PoE model: 200 g; Non-PoE model: 190 g | |
| Interface | IEEE 802.3 1000BASE-T (Gigabit Ethernet), IEEE 802.3af (PoE) | |
| Interface standard | GigE Vision Standard V1.2 | |
| Camera control standard | GenICam SFNC V1.2.1 compliant | |
| Regulations | CE, RoHS, REACH, WEEE, FCC, ICES |
