Allied Vision Mako G-192
GigE camera with Teledyne e2v CMOS sensor,
Main > Product > Area Scan camera > GigE Cameras > Allied Vision GigE Cameras > AVT Mako G Series > Mako G-192
Allied Vision Mako G-192
The Mako G-192B/G-192C is a GigE machine vision camera that incorporates the high quality Type 1/1.8 (9 mm diagonal) Teledyne e2v Sapphire EV76C570 CMOS sensor. At full resolution, this camera runs 60 frames per second. With a smaller region of interest, higher frame rates are possible. Mako G cameras have the same ultra-compact form factor and the same mounting positions as many analog cameras. All models include Power over Ethernet (PoE), two opto-isolated outputs, and a 64 MByte image buffer. The image quality profits from the precisely aligned sensor. By default monochrome models ship with no optical filter and color models ship with IRC Hoya C-5000 IR cut filter.
Image optimization features:
- Auto gain (manual gain control: 0 to 24 dB; 1 dB increments)
- Auto exposure (exposure time control varies by pixel format)
- Auto white balance (color models only)
- Binning (1×1 and 2×2 binning)
- Color correction, hue, saturation (color models only)
- Decimation
- Gamma correction
- Look-up table (LUT) (1)
- Pixel defect masking
- Region of interest (ROI), separate ROI for auto features
- Reverse X/Y
Camera control features:
- Event channel
- Image chunk data
- Storable user sets
- StreamBytesPerSecond (easy bandwidth control)
- Stream hold
- Sync out modes: Trigger ready, input, exposing, readout, imaging, strobe, GPO
- Switchable Rolling / Global / GlobalReset shutter modes
- Temperature monitoring (main board only)
| Mako G-192B | Mako G-192C |
|
|---|---|---|
| Resolution | 1600 (H) x 1200 (V) 1.9 MP | |
| Sensor | Teledyne e2v EV76C570 | |
| Sensor type | CMOS | |
| Shutter type | Global, Global Reset, and Rolling | |
| Sensor size | Type 1/1.8 9 mm diagonal | |
| Pixel size | 4.5μmx4.5μm | |
| Lens mount | Standard: C-Mount Optional: See the Modular Concept | |
| Optical filter | Standard: No optical filter Optional: See the Modular Concept | Standard: Hoya C-5000 IR cut filter Optional: See the Modular Concept |
| Maximum frame rate at full resolution | 60 frames per second | |
| Maximum image bit depth | 10-bit | |
| Image buffer | 64 MB | |
| StreamHoldCapacity | Up to 34 frames at full resolution | |
| Monochrome formats | Mono8, Mono10 | Mono8 |
| Color formats (YUV) | n/a | YUV411Packed, YUV422Packed, YUV444Packed |
| Color formats (RGB) | n/a | RGB8Packed, BGR8Packed |
| RAW formats | n/a | BayerBG8, BayerBG10 |
| Gain control | 0 to 24 dB; 1 dB increments | |
| Binning | Horizontal: 1 to 2 pixels Vertical: 1 to 2 rows Teledyne e2v sensors support 1×1 and 2×2 binning. | |
| Decimation | Horizontal and Vertical: 1, 2, 4, 8 factor | |
| Opto-isolated I/Os | 1 input, 3 outputs | |
| Voltage requirements | 12 to 24 VDC; PoE | |
| Power consumption | 2.1W@12VDC;2.4WPoE | |
| Power consumption (30 fps variants) | 4.5W@12VDC 5.3 W PoE | |
| Trigger latency | Idle state: 19.3 μs; Frame valid state: 45.2 μs | |
| Trigger jitter | Idle state: ±6.9 μs; Frame valid state: ±6.9 μs | |
| Operating temperature | +5°C to +45°C ambient temperature (without condensation) | |
| Storage temperature | -10°C to +70°C ambient temperature (without condensation) | |
| Body dimensions (L x W x H) | 60.5 x 29.2 x 29.2 mm | |
| Mass (typical) | 80g | |
| Interface | IEEE 802.3 1000BASE-T (Gigabit Ethernet), IEEE 802.3af (PoE) | |
| Interface standard | GigE Vision Standard V1.2 | |
| Camera control standard | GenICam SFNC V1.2.1 | |
| Regulations | CE, RoHS, REACH, WEEE, FCC, ICES |
