Toshiba Teli BU1203MCF
Integrated-(one-body)-type color camera
Main > Product > Area Scan camera > USB3 Cameras > Toshiba Teli USB3 Cameras > Teli BU1203MCF
Toshiba Teli BU1203MCF
BU1203M series is an integrated-(one-body)-type color camera that adopts a rolling shutter CMOS sensor. For video output and camera control, the USB 3.0 interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
Key Features
- High frame rate
- Global Reset
- USB interface
- USB3 Vision
- GenICam Ver.2.4, Ver.3.0
- IIDC2 Digital Camera Control Specification Ver.1.1.0
- e-CON Connector adoption
- Scalable
- Random Trigger Shutter
- Color Processing
- IR-cut filter
| Model | BU1203MC | BU1203MCF |
|---|---|---|
| Interface | USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported) | |
| Pixels | 12M | |
| Imager | CMOS image sensor | |
| Imager model | IMX226CQJ | |
| Resolution | 4,000(H) x 3,000(V) | |
| Frame rate | 30fps (Bayer 8bit, Mono 8bit) | |
| Pixel size | 1.85μm x 1.85μm | |
| Scanning area | 7.40mm(H) x 5.55mm(V) | |
| Image size | 1/1.7 type | |
| Aspect ratio | 4:3 | |
| Scanning | Progressive | |
| Electronic shutter method | MANUAL: Rolling shutter / Random Trigger Shutter: Global reset | |
| Random Trigger Shutter Type | External Trigger / Software Trigger | |
| Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) | |
| Sequential Shutter | 16 entries (max) | |
| Exposure Time | MANUAL: 43.28μs to 16s Random Trigger Shutter: 682μs to 16s (Edge or Bulk mode), 682μs to Trigger width (Level mode) |
|
| Synchronization System | Internal | |
| On-chip Color Filter | RGB primary color mosaic-on-tip color filter | |
| Optical glass/filter | - | IR Cut Filter |
| Sensitivity | 4,200 lx (F8, 1/30s) | 4,600 lx (F8, 1/30s) |
| Minimum illuminance | 13 lx (F1.4, Gain: +18dB, Video level: 50%) | 14 lx (F1.4, Gain: +18dB, Video level: 50%) |
| Gain | MANUAL: 0 to +18dB | |
| Black Level | -25% to +25% | |
| Gamma / LUT | γ=1.0 to 0.45 / In 10bit, Out 10bit | |
| White balance | Manual white-balance / One-push white-balance | |
| Image Buffer | 256MB / 22 frames (all pixels readout) | |
| Image Output Format | Bayer 8bit, Mono 8bit | |
| Readout Mode | All pixel, Scalable, Mirroring, Flip | |
| External trigger input | Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum) |
|
| Power supply | DC5V ±5% | |
| Power consumption | 2.7W max. | |
| Lens mount | C-mount | |
| External dimension | 29(W) x 29(H) x 16(D) mm (Not including protruding parts) | |
| Mass | approx. 32g | |
| Operation temperature | 0°C to 40°C (below 50°C on cabinet surface) | |
| Operation humidity | 10% to 90% (no condensation) | |
| Conformity | CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2 | |
