
Main > Product > Line Scan Cameras > NED Ryugan Series > RMSL2K53GE
NED RMSL2K53GE

- Line Rate: 53.1kHz
- Easy control of gain / offset / video output with external software
- GigE Vision® external interface for easy connection between camera and PC
- Data transmission up to 100m using a CAT-5e cable or above
- Single power source DC12~15V for operation
- Pixel non-linearity / shading correcting function

Model | RMSL2K53GE |
---|---|
Resolution | 2048 pixels |
Chroma | Monochrome |
Pixel size W x H | 14 x 14 µm |
Sensor length | 28.672 mm |
Line Rate | 53.1 kHz |
Data rate | 125 MHz |
Bit depth | 8, 10 |
Maximum scan rate | Mono8: 53.1 kHz Mono10: 28.0 kHz Mono10 packed: 37.4 kHz |
Responsivity (V/ [lx・s]) | 100 (V/[lx・s]) Analog 5V conversion sensitivity Visible area (400~700nm) |
Gain adjustable range Analog amplifier + digital | Analog Amplifier: x1~x10 (8 Steps) Digital: x1~x2 (512 Steps) |
Digital offset adjustable range (DN) | 8bit: -127~127(0.5DN/Step) |
FPN (Fixed Pattern Noise) | 5% (no correction, at min. gain) 2% (with correction, at min. gain) |
PRNU (Photo Response Non Uniformity) | 8% (no correction, at min. gain) 4% (with correction, at min. gain) |
Random noise | Typically 10DN (peak value, at min. gain) |
Size W x H x D | 60 x 100 x 83 mm |
Weight (body without mount) | 455 (F-mount) g |
Lens mount | F |
Video output format | GigE |
Control input | Line in 1~3: Exposure trigger, Frame trigger or Encoder signal |
Connectors | Data/controller:RJ45 Power supply:Hirose: HR10A (6Pin) External trigger: Hirose: HR10A (12Pin) |
Power supply voltage | DC12~15[±5%] V |
Consumption current | 580 mA |
Operating temperature No condensation | 0~50 ˚C |