Leading Distributor for Machine Vision Components and Technologies in SEA

NED RMSL4K76CL

Ryugan is a new series of high speed line scan cameras from NED.

NED RMSL4K76CL

  • High speed readout(340MHz)
  • Line rate: 76.92 kHz
  • High resolution(4096 pixels)
  • Choice of 2tap or 4tap with 4096 pixels on data format
  • Choice of 8bit or 10bit on readout of all format
  • Choice of 40MHz, 60MHz or 85MHz on data output clock speed
  • Easy control of gain / offset with software outside the camera.
  • Easy connection with a variety of frame grabber boards via Camera Link interface
  • Single power source DC12V to 15 for operation
  • Flat-field correction – minimizes lens vignetting, non-uniform lighting and sensor FPN and PRNU
ModelRMSL4K76CL
Resolution4096 pixels
ChromaMonochrome
Pixel size W x H7 x 7 µm
Sensor length28.672 mm
Spectral responsivity400-1000 (Peak: 625) nm
Line Rate76.92 kHz
Data rate340 | 240 | 160 | 170 | 120 | 80 (Selectable rate) MHz
Bit depth8, 10
Clock speed85×4 | 60×4 | 40×4 | 85×2 | 60×2 | 40×2 MHz
Taps2, 4
Saturation exposure (lx・s)0.071 [Minimum Gain, Pixel Correction Initial Value, Daylight Fluorescent Light
Responsivity (V/ [lx・s])100 (V/[lx・s]) Analog 5V Conversion Sensitivity Visible Area (400~700nm)
Gain adjustable range
Analog amplifier + digital
Analog Amplifier: x1~x10 (8 Steps)
Digital: x1~x2 (512 Steps)
Digital offset adjustable range (DN)Digital: -127~127(0.5DN/Step: 8bit) -127~127(2.0DN/Step: 10bit)
FPN (Fixed Pattern Noise)Typically 5 DN (without correction, at minimum gain) 2 DN (with correction, at minimum gain)
PRNU (Photo Response Non Uniformity)Typically 20 DN (without correction, at minimum gain) 4DN (with correction, at minimum gain)
Random noiseTypically 20DN (peak value, at minimum gain)
Size W x H x D60 x 100 x 70 mm
Weight (body without mount)380 g
Lens mountF
Video output formatCamera Link Medium Configuration (8or10bit/4tap) Camera Link Base Configuration (8or10bit/2tap)
Control inputCC1: External Trigger Signal, CC2-4: Not in use
ConnectorsData/controller:3M: MDR26 [Camera Link] x 2
Power supply: Hirose: HR10G (6Pin)
Power supply voltageDC12 to 15 [+/-5%] V
Consumption current250 mA
Operating temperature No condensation0 to 50 ˚C

Area Scan Camera Finder

Camera Finder

Click to search now

Line Scan Camera Finder

linescan Finder round 220 pix

Click to search now

Machine Vision Lens Finder

Click to search now

Machine Vision Lighting Finder

Click to search now