Main > Product > Line Scan Cameras > NED Line Scan Camera > NED Ryugan Series > RMSL6K17GE
NED RMSL6K17GE
- Line rate: 17.8kHz
- Easy control of gain / offset / video output with external software
- GigE Vision® external interface for easy connection between camera and PC
- Data transmission up to 100m using a CAT-5e cable or above
- Single power source DC12~15V for operation
- Pixel non-linearity / shading correcting function
| Model | RMSL6K17GE |
|---|---|
| Resolution | 6144 pixels |
| Chroma | Monochrome |
| Pixel size W x H | 7 x 7 µm |
| Sensor length | 43.008 mm |
| Line Rate | 17.8 kHz |
| Data rate | 125 MHz |
| Bit depth | 8, 10 |
| Maximum scan rate | Mono8: 17.8 kHz Mono10: 8.9 kHz Mono10 packed: 11.9 kHz |
| Responsivity (V/ [lx･s]) | 100 (V/[lx･s]) Analog 5V Conversion Sensitivity Visible Area (400~700nm) |
| Gain adjustable range Analog amplifier + digital | Analog Amplifier: x1～x10 (8 Steps) Digital: x1～x2 (512 Steps) |
| Digital offset adjustable range (DN) | 8bit: -63～63(0.5DN/Step) 10bit: -254～254(2DN/Step) |
| FPN (Fixed Pattern Noise) | 5% (no correction, at min. gain) 2% (with correction, at min. gain) |
| PRNU (Photo Response Non Uniformity) | 8% (no correction, at min. gain) 4% (with correction, at min. gain) |
| Random noise | Typically 20DN (peak value, at minimum gain) |
| Size W x H x D | 60 x 100 x 83.3 mm |
| Weight (body without mount) | 460 g |
| Lens mount | F |
| Control input | Line In 1-3: Exposure trigger, Frame trigger or Encoder signal |
| Connectors | Data/controller:RJ45 Power supply:Hirose: HR10A (6Pin) External trigger: Hirose: HR10A (12Pin) |
| Power supply voltage | DC12～15[±5%] V |
| Consumption current | 500 mA |
| Operating temperature No condensation | 0 to 50 ˚C |
