Main > Product > Line Scan Cameras > NED Line Scan Camera > NED Ryugan Series > RMSL8K39CL
NED RMSL8K39CL
- Line rate : 39.06 kHz
- High resolution(3.5μ x 8192 pixels)
- Choice of 2tap or 4tap with 8192 pixels on data format
- Choice of 8bit or 10bit on readout of all format
- Choice of 40MHz, 60MHz or 85MHz on data output clock speed
- Easy control of gain / offset with software outside the camera.
- Easy connection with a variety of frame grabber boards via Camera Link interface
- Single power source DC12V to 15 for operation
- Flat-field correction – minimizes lens vignetting, non-uniform lighting and sensor FPN and PRNU
| Model | RMSL8K39CL |
|---|---|
| Resolution | 8192 pixels |
| Chroma | Monochrome |
| Pixel size W x H | 3.5 x 3.5 µm |
| Sensor length | 28.672 mm |
| Spectral responsivity | 400-1000 (Peak: 625) nm |
| Line rate | 39.06 kHz |
| Data rate | 340/320/240/160/170/160/120/80 (Selectable rate) MHz |
| Bit depth | 8, 10 |
| Clock speed | 85×4/80×4/60×4/40×4/85×2/80×2/60×2/40×2 MHz |
| Taps | 2, 4 |
| Saturation exposure (lx･s) | 0.071 [Minimum Gain, Pixel Correction Initial Value, Daylight Fluorescent Light] |
| Responsivity (V/ [lx･s]) | 50 (V/[lx･s]) Analog 5V Conversion Sensitivity Visible Area (400~700nm) |
| Gain adjustable range Analog amplifier + digital | Analog Amplifier: x1～x10 (8 Steps) Digital: x1～x2 (512 Steps) |
| Digital offset adjustable range (DN) | 8bit:: -127～127(0.5DN/Step) 10bit: -127～127(2.0DN/Step) |
| FPN (Fixed Pattern Noise) | Typically 5 DN (without correction, at minimum gain) 2 DN (with correction, at minimum gain) |
| PRNU (Photo Response Non Uniformity) | Typically 20 DN (without correction, at minimum gain) 4DN (with correction, at minimum gain) |
| Random noise | Typically 20DN (peak value, at minimum gain) |
| Size W x H x D | 60 x 100 x 70 mm |
| Weight (body without mount) | 380 g |
| Lens mount | F |
| Video output format | Camera Link Medium Configuration (8or10bit/4tap) Camera Link Base Configuration (8or10bit/2tap |
| Control input | CC1: External Trigger Signal, CC2-4: Not in use |
| Connectors | Data/controller:3M: MDR26 [Camera Link] x 2 Power supply:Hirose: HR10G (6Pin) |
| Power supply voltage | DC12 to 15 [+/-5%] V |
| Consumption current | 250 mA |
| Operating temperature No condensation | 0 to 50 ˚C |
