
Main > Product > Line Scan Cameras > NED Line Scan Camera > NED Ryugan Series > RMSL8K76CL
NED RMSL8K76CL

- Line rate:76.92 kHz
- High resolution(8192 pixels)
- Choice of 2tap, 4tap or 8tap with 8192 pixels on data format
- Choice of 8bit or 10bit on readout of all format
- Choice of 40MHz, 60MHz or 85MHz on data output clock speed
- Easy control of gain / offset with software outside the camera.
- Easy connection with a variety of frame grabber boards via Camera Link interface
- Single power source DC12V to 15 for operation
- Flat-field correction – minimizes lens vignetting, non-uniform lighting and sensor FPN and PRNU

Model | RMSL8K76CL |
---|---|
Resolution | 8192 pixels |
Chroma | Monochrome |
Pixel size W x H | 7 x 7 µm |
Sensor length | 57.344 mm |
Spectral responsivity | 400-1000 (Peak: 625) nm |
Line rate | 76.92 kHz |
Data rate | 680 MHz |
Bit depth | 8, 10 |
Taps | 2, 4, 8 |
Saturation exposure (lx・s) | 0.071 [Minimum Gain, Pixel Correction Initial Value, Daylight Fluorescent Light] |
Responsivity (V/ [lx・s]) | 100 (V/[lx・s]) Analog 5V Conversion Sensitivity Visible Area (400~700nm) |
Gain adjustable range Analog amplifier + digital | Analog Amplifier: x1~x10 (8 Steps) Digital: x1~x2 (512 s) |
Digital offset adjustable range (DN) | Digital: -127~127(0.5DN/STEP:8bit) -127~127(2.0DN/STEP:10bit) |
FPN (Fixed Pattern Noise) | Typically 5 DN (without correction, at minimum gain) 2 DN (with correction, at minimum gain) |
PRNU (Photo Response Non Uniformity) | Typically 20 DN (without correction, at minimum gain) 4DN (with correction, at minimum gain) |
Random noise | Typically 20DN (peak value, at minimum gain) |
Size W x H x D | 80 x120 x 65 mm |
Weight (body without mount) | 600 g |
Lens mount | M72 |
Video output format | Camera Link Deca Configuration (10bit/8tap) Camera Link Full Configuration (8bit/8tap) Camera Link Medium Configuration (8or10bit/4tap) Camera Link Base Configuration (8or10bit/2tap) |
Control input | CC1: External Trigger Signal, CC2-4: Not in use |
Connectors | Data/controller:3M: 3M: MDR26 [Camera Link] x 2 Power supply:Hirose: HR10G (6Pin) |
Power supply voltage | DC12 to 15 [+/-5%] V |
Consumption current | 250 mA |
Operating temperature No condensation | 0 to 50 ˚C |