
Main > Product > Line Scan Cameras > NED Line Scan Camera > NED Clisbee-A Series > XCM2085DLMT2
NED XCM2085DLMT2

- Line rate :75.69 kHz
- 7μm 2048 pixels x 2, dual line scan camera
- Low noise image with 2 lines TDI mode
- Binning function on data format (14μm-square 2048 pixels_2tap equivalent by 2×2 pixels binning)
- On-chip A/D converter (8/10bit) on readout of all format
- Easy control of gain / offset / gamma exchange with software outside the camera.
- Easy connection with a variety of frame grabber boards via Camera Link interface
- Single power source DC 12V to 15V for operation
- PRNU / Shading correcting function

Model | XCM2085DLMT2 |
---|---|
Resolution | 2048 x 2 pixels |
Chroma | Monochrome |
Pixel size W x H | 7 x 7 µm |
Sensor length | 14.336 mm |
Spectral responsivity | 100 nm |
Line rate | 75.69 kHz |
Data rate | 40 | 80 | 85 | 170 MHz |
Bit depth | 8, 10 |
Clock speed | 40×1 | 85×1 | 40×2 | 85×2 MHz |
Taps | 1, 2 |
Responsivity (V/ [lx・s]) | 100 Analog 5V Conversion Sensitivity |
Gain adjustable range Analog amplifier + digital | Analog Amplifier: x1 to x9.7 (7 Steps) Digital: x1 to x2 (512 Steps) |
Digital offset adjustable range (DN) | 8bit: -127 to 127 (0.5DN/step) |
FPN (Fixed Pattern Noise) | Typically 5% (without correction, at minimum gain) 2% (with correction, at minimum gain) |
PRNU (Photo Response Non Uniformity) | Typically 8% (without correction, at minimum gain) 4% (with correction, at minimum gain) |
Random noise | Typically 10DN (peak value, at minimum gain) |
Size W x H x D | 60 x 60 x 35 mm |
Weight (body without mount) | 170 g |
Lens mount | C, F |
Video output format | 2048 pixels: Camera Link Base Configuration (8/10bit / 2 tap) 1024 pixels: Camera Link Base Configuration (8/10bit / 1 tap) |
Control input | CC1: External Trigger Signal CC2-4: Not in use |
Connectors | Data/controller:3M: MDR26 [Camera Link] x 1 Power supply: Hirose: HR10A (6Pin) |
Power supply voltage | DC12~15[±5%] V |
Consumption current | 170 mA |
Operating temperature No condensation | 0 to 50 ˚C |