Main > Product > Line Scan Cameras > NED Line Scan Camera > NED Clisbee-A Series > XCM4085DLMT4
NED XCM4085DLMT4
- Line Rate: 76.50 kHz
- 7μ 4096 pixels x 2 dual line scan camera
- Data rate:340MHz
- Low noise image with 2 lines TDI mode
- Choice of 2 taps or 4 taps with 4096 pixels on data format
- Two type readout formats with 4096 pixels 4 taps
- Binning function on data format (14μm-square 2048 pixels_2tap equivalent by 2×2 pixels binning)
- On-chip A/D converter (8/10bit) on readout of all format
- Easy control of gain / offset / gamma exchange with software outside the camera.
- Easy connection with a variety of frame grabber boards via Camera Link interface
- Single power source DC 12V to 15V for operation
- PRNU / Shading correcting function
| Model | XCM4085DLMT4 |
|---|---|
| Resolution | 4096 x 2 pixels |
| Chroma | Monochrome |
| Pixel size W x H | 7 x 7 µm |
| Sensor length | 28.672 mm |
| Spectral responsivity | 100 nm |
| Line rate | 76.50 kHz |
| Bit depth | 8, 10 |
| Taps | 2, 4 |
| Responsivity (V/ [lx･s]) | 100 Analog 5V Conversion Sensitivity |
| Gain adjustable range Analog amplifier + digital | Analog Amplifier: x1 to x17.8 (8 Steps) Digital: x1 to x2 (512 Steps) |
| Digital offset adjustable range (DN) | 8bit: -127 to 127 (0.5DN/step) |
| FPN (Fixed Pattern Noise) | Typically 5% (without correction, at minimum gain) 2% (with correction, at minimum gain) |
| PRNU (Photo Response Non Uniformity) | Typically 8% (without correction, at minimum gain) 4% (with correction, at minimum gain) |
| Random noise | Typically 10DN (peak value, at minimum gain) |
| Size W x H x D | 60 x 100 x 35 mm |
| Weight (body without mount) | 300 g |
| Lens mount | F |
| Video output format | Camera Link Medium Configuration (8/10bit / 4 tap) |
| Control input | CC1: External Trigger Signal CC2-4: Not in use |
| Connectors | Data/controller:Canare: 3M: MDR26 [Camera Link] x 2 Power supply: Hirose: HR10A (6Pin) |
| Power supply voltage | DC12～15[±5%] V |
| Operating temperature No condensation | 0 to 50 ˚C |
