V2GEP-PCIE1XG101

10/100/1000M Ethernet (POE+) to PCI Express x1 Host Card

V2GEP-PCIE1XG101

The 10/100/1000M Ethernet controller supports the PCI Express 1.1 bus interface for host communications with power management, and is compliant with the IEEE 802.3u specification for 10/100Mbps Ethernet and the IEEE 802.3ab specification for 1000Mbps Ethernet.

The 10/100/1000M Ethernet controller is fully compliant with Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP, UDP) Checksum and Segmentation Task-offload (Large send and Giant send) features, and supports IEEE 802 IP Layer 2 priority encoding and IEEE 802.1Q Virtual bridged Local Area Network (VLAN). The above features contribute to lowering CPU utilization, especially benefiting performance when in operation on a network server.

Highlights

  • Supports PCI Express Specification Revision 1.1
  • Single (x1) PCI Express Lane, Low-Profile Form Factor
  • 10/100/1000M Gigabit Ethernet (POE+) ports
    • Support IEEE 802.3at for PoE+ (Power over Ethernet Plus)
    • Power Sourcing Equipment (PSE) design, provides data and up to 30W of power on ethernet port
  • Supports jumbo frame to 9K bytes
ModelV2GEP-PCIE1XG101
Ethernet Feature Integrated 10/100/1000M transceiver
Auto-Negotiation with Next Page capability
Supports PCI Express 1.1
Supports pair swap/polarity/skew correction
Crossover Detection & Auto-Correction
Wake-on-LAN and remote wake-up support
Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation Task-offload (Large send v1 and Large send v2) support
Supports Full Duplex flow control (IEEE 802.3x)
Supports jumbo frame to 9K bytes
Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Supports IEEE 802.1P Layer 2 Priority Encoding
Supports IEEE 802.1Q VLAN tagging
Supports IEEE 802.3az-2010 (EEE)
Supports power down/link down power saving
Supports PCI MSI (Message Signaled Interrupt) and MSI-X
Supports quad core Receive-Side Scaling (RSS)
Supports Alert Standard Format 2.0 (ASF2.0)
Supports Protocol Offload (ARP & NS)
Supports Customized LEDs
Supports 1-Lane 2.5Gbps PCI Express Bus
Supports hardware ECC (Error Correction Code) function
Supports hardware CRC (Cyclic Redundancy Check) function
POE+ Feature
Supports IEEE 802.3at Power Sourcing Equipment (PSE)
Operates from a 54 V supply
Provides PD real-time protection through the following mechanisms: overload, under-load, over-voltage, over-temperature, and short-circuit.
Auto mode – allows turning PDs on and off automatically.
Power Input for POE
Step-Up 12V from either PCIe Slot or auxiliary SATA power connector

From PCIe Slot
25 W Slot (Max. 25W)
75 W Slot (Max. 30W)
From SATA Power Connector
SATA Power (Max. 30 W)
LED Indicators
Power LED
On: Port Power On (normal operation)
0.4Hz Blink: Power Management event
0.8Hz Blink: Port Over Load / Port Short Circuit / Port failed at Startup
3.3Hz Blink: Vmain_Out of Range or Over Temp
Off: Port Off
Link Status LED
Number of Port
10/100/1000M Gigabit Ethernet (POE+) port
1000 BASE-T Single-Port Magnetics/RJ-45 with POE

  • Computer with PCI Express slot ( x1, x4, x8, x16)

 

  • Windows XP/ Vista/ 7/ 8/ 10
  • Linux kernel 3.x /2.6.x/ 2.4.x

 

Certifications
  • CE Test: Pass
  • FCC Test : Pass
  • VCCI Test: Pass
  • RCM Test: Pass

      

 

 

  • 64mm(H) x 118mm(L)
  • NW: 73.5g

 

Version: 1.12.0037
Content: Drivers for Windows XP/Vista/7/8.1/10 Download

Version: 1.12.0034
Content: Drivers for Windows XP/Vista/7/8.1/10 Download

Version: 10.13.1110.2016
Content: Drivers for Linux Download

* Specifications subject to change without prior notice

Area Scan Camera Finder

Camera Finder

Click to search now

Line Scan Camera Finder

linescan Finder round 220 pix

Click to search now

Machine Vision Lens Finder

Click to search now

Machine Vision Lighting Finder

Click to search now