VLP-2430-3eN
Digital Power Supply (Ethernet type)
Main > Product > Machine Vision Lighting Controller > VST Lighting Controllers > VLP-eN series > VLP-2430-3eN
VLP-2430-3eN
The Highlight Features
- 24V Digital power supply.
- Strobe mode available (not over-drive).
- External control available via Ethernet.
- Compact design.
- Din-rail attachable.
- RoHS compliant.
| Model Name | VLP-2430-3eN |
|---|---|
| Input Voltage | AC 100 – 240V (rated) ±10% 50/60Hz |
| Power Consumption | AC100V/1A – AC240V/0.5A |
| Inrush Current(A) | 30/60 (AC115/230V) at cold start |
| AC Power Cord | 3m (max.) cord with a protective earth terminal |
| Rated output voltage | 3 Channels DC24V (between output and GND) |
| Rated output current | 1.1A / Total for 3 channels |
| Input Connectors | AC input 3-pin inlet EN 60320-1 certified C14 type x 1 |
| Output Connectors | SMP-03V-BC(JST) 1 : output+ 2 : NC 3 : output- Insulation resistance:500MΩ(min.) Withstand voltage:AC1500V/minute |
| External control connectors | Trigger input MIL connector (MIL-C-83503 compliant), 10-pole For setting the light intensity and lighting mode: RJ-45 |
| Intensity Control | INT.: Control manually by volume knobs EXT.: Remote control by external Ethernet |
| Strobe Control | NOR.: The lights are always ON. STR.: Strobe control. |
| Lighting method | PWM (100KHz) |
| Overcurrent protection | Operates at 105% or higher of the rated current |
| Insulation resistance/ withstand voltage | Between input and FG (frame ground): AC1500V /minute (10mA), DC500V 50MΩ (min.) |
| Operating Environment | Temperature: 0 to 40°C Humidity: 20~85% RH without condensation Altitude: 2000m Max. Pollution level: 2 Protective ground classI Installation category II(restricted to use in indoor environment) |
| Storage Temperature/ Humidity | -15 to 40°C/20 to 85% RH without condensation |
| Cooling Method | Natural air cooling |
| Dimensions | W120mm x D88mm x H126.5mm |
| Weight | Approx. 950g |
| Environmental regulations | RoHS compliant |
| European Standards (CE Marking) | EN61326-1 , EN61010-1 |
