General Purpose I/O module for Coaxlink Octo
HD26F I/O Extension Module - Standard I/O Set
Main > Product > Frame Grabbers & Interface Cards > IO adapter > General Purpose I/O module for Coaxlink Octo
General Purpose I/O module for Coaxlink Octo
- Robust HD26F Sub-D connector for I/O set #1
- Second standard I/O set with 10 additional I/O lines
- Robust HD26F Sub-D connector for I/O set #2
- Flat cable header connector for I/O set #2
- Self-powered module
| Model Name | General Purpose I/O module for Coaxlink Octo |
|---|---|
| Format | Standard profile PC card |
| Connectors | EXTERNAL I/O 1' on bracket: 26-pin 3-row high-density female sub-D connector standard I/O lines set #1 and power output ' EXTERNAL I/O 2' on bracket: 26-pin 3-row high-density female sub-D connector standard I/O lines set #2 and power output 'INTERNAL I/O 2 ' on PCB: 26-pin 2-row 0.1" pitch IDC female connector standard I/O lines set #2 'INTERNAL I/O 1' on PCB: 26-pin right-angled 2-row 0.1" pitch IDC female connector connected via the provided INTERNAL I/O cable to the INTERNAL I/O 1 connector of the 3602 Coaxlink Octo card 'I/O EXTENSION' on PCB 26-pin 2-row 0.05" pitch IDC female connector connected via the provided EXTEBSION I/O cable to the EXTENSION I/O connector of the 3602 Coaxlink Octo card |
| Dimensions | PCB: 80 mm x 61.5 mm , 3.15 in x 2.4 in I/O Extension cable length: 150 mm, 5.9 in Internal I/O cable length: 160 mm, 6.3 in |
| Number of lines | 20 I/O lines: 4 differential inputs (DIN) 4 singled-ended TTL inputs/outputs (TTLIO) 8 isolated inputs (IIN) 4 isolated outputs (IOUT) |
| Usage | Any I/O input lines can be used by any LIN tool of the I/O Toolbox Selected pairs of I/O input lines can be used by any QDC tool of the I/O toolbox to decode A/B signals of a motion encoder The LIN and QDC tools outputs can be further processed by the other tools (DIV, MDV, DEL) of the I/O toolbox to generate any of the following "trigger" events: The "cycle trigger" of the Camera and Illumination controller The "cycle sequence trigger" of the Camera and Illumination controller The "start-of-scan trigger" of the Acquisition Controller (line-scan only) The "end-of-scan trigger" of the Acquisition Controller (line-scan only) |
| Electrical specifications | DIN: High-speed differential inputs compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers TTLIO: High-speed 5V-compliant TTL inputs or LVTTL outputs, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers or LVTTL, TTL, 3V CMOS receivers IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers IOUT: Isolated contact outputs compatible with 30V / 100mA loads |
| Power output | Non-isolated, +12V, 1A delivered by the Coaxlink card though the I/O EXTENSION cable |
| Supply voltage | 3.3 V DC delivered by the Coaxlink card through the I/O EXTENSION cable |
| Power consumption | Max. 3 W (excluding 12 V POWER output) |
| Operating ambient air temperature | 0 to +55 °C / +32 to +131 °F |
| Operating ambient air humidity | 10 to 90% RH non-condensing |
| Storage ambient air temperature | -20 to +70 °C/ -4 to +158 °F |
| Storage ambient air humidity | 10% to 90% RH non-condensing |
| KC Certification | Korean Radio Waves Act, Article 58-2, Clause 3 |
| RoHS | European Union Directive 2015/863 (ROHS3) |
| REACH | European Union Regulation 1907/2006 |
| WEEE | Must be disposed of separately from normal household waste and must be recycled according to local regulations |
