Harrier 10x AF-Zoom USB/HDMI
Compact and low-power camera option
Main > Product > Machine Vision Area Scan camera > Active Silicon Industrial Machine Vision Cameras > Harrier 10x AF-Zoom USB/HDMI
Harrier 10x AF-Zoom USB/HDMI
- Compact USB 3.1 Gen1 and HDMI camera solution.
- 10x Optical Zoom & 32x Digital Zoom.
- 1/2.8-type 2MP Sony IMX462LQR-C STARVIS CMOS sensor.
- Supports 1080p – 60/50/30 fps, 720p – 60/50/30 fps.
- Simultaneous display on both video outputs.
- Effective number of pixels approx. 2,130,000.
- Shutter speed 1/30(25) – 1/30,000 sec.
- TTL/RS-232/RS-485 Serial VISCA, Pelco – D/P Control Protocol, or USB 3.1 (UVC) port.
- Virtual COM port for VISCA Control over USB.
- Power supply over USB cable capability.
| Model | Harrier 10x AF-Zoom USB/HDMI |
|---|---|
| Image sensor | 1/2.8″ Sony IMX462LQR-C CMOS sensor (progressive scan) [issue02 camera] |
| Effective no. of pixels | Approx. 2,130,000 pixels |
| Video format (HD) | 1080p/60, 1080p/30, 720p/60 720p/30 |
| Video format (SD) | NTSC / PAL |
| Minimum illumination | Color (1/30s, 60dB): 0.003 lux; Color DSS (1/8s, 60dB): 0.00075 lux; BW (1/30s, 60dB): 0.0004lux; BW DSS (1/8s, 60dB): 0.0001 lux; [values for AS-CAM-10SHD-A issue02] |
| S/N ratio | More than 50dB |
| Gain control (AGC) | OFF/ON |
| Shutter speed | 1/30(25) – 1/30,000 sec |
| Sync system | Internal |
| Aperture control | 20steps |
| DSS | Off / 2x / 4x / (8x:60 or 50 fps only) [DSS = Digital Slow Shutter] |
| White balance | Auto, One Push, Manual, Indoor, Outdoor |
| AE (Auto exposure mode) | Auto, lris Priority, Shutter Priority, Manual |
| Lens (wide to tele) | 10x optical zoom f= 5.1mm to 51mm F1.6 to 1.8 |
| Digital zoom | OFF / MAX 2x – 32x |
| Focusing system | Auto, one push, manual |
| Horizontal viewing angle (wide to tele) | 57° to 6.2° |
| Minimum object distance (wide to tele) | 100mm to 1000mm |
| Horizontal resolution | 700 TV lines |
| Control protocol | UVC / Pelco – D/P / VISCA: USB (virtual COM port) / TTL / RS-232 |
| Baud rate | 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200 |
| Camera Functions | |
| Day & Night mode | Infrared Cut filter Removal (ICR). Auto / Day / Night / Ext-in. |
| Wide Dynamic Range (WDR) | real-time. OFF / WDR / BLC. |
| Digital Noise Reduction | 2D+3D DNR. OFF / Low / Middle / High / Auto |
| Digital Image Stabilization | Available. |
| High/Back Light Compensation (HLC/BLC) | OFF / ON / Night only. |
| Defog | Available. |
| Motion detection | Detection OFF / 3 positions. |
| Privacy mask | Mask OFF / 24 positions. |
| Defect detection | Available, ON/OFF. |
| Mirror | Off, H, V, H&V. |
| Connector Specification | |
| KEL30 Connector (J1) | The interface board is fitted with a 30-way miniature connector to link to the video output connector on the camera. Connector type: KEL USL00-30L. Mating cable: A 30-way micro coaxial cable (AS-CIB-USL30-100MM) is supplied with the camera. Lengths available: KEL USL20-30SS-010-C (100mm length) or KEL USL20-30SS-005-C (50mm length). |
| Input/Output Connector (J2) | The interface board is fitted with an industry standard 4-way connector for VSync/PWM signal output and test pattern/reset control inputs. Connector type: JST SM04B-SRSS-TB Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-003-A (see ordering information below). See Harrier USB/HDMI Camera Interface Board datasheet for pin assignments and control options. |
| Power and Control Connector (J3) | The interface board is fitted with an industry standard 10-way connector for power and serial control. Connector type: JST SM10B-SRSS-TB Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-003-A (see ordering information below). See Harrier USB/HDMI Camera Interface Board datasheet for pin assignment and output options. |
| JTAG Connector (J4): | Test connector used in manufacturing for circuit verification. |
| HDMI Output Connector (J5) | The interface board is fitted with a micro HDMI display output connector. HDMI output is active when an HDMI cable is connected. Connector type: HDMI Type D (micro). Mating Connector: Standard micro HDMI cable. |
| USB 3.0 Connector (J6) | This USB Type C connector provides a USB Video Class (UVC) v1.1 video stream for connection to a host PC. The connector also provides a UVC control port for camera control (optional). It can also provide power to the camera or board if the USB connection has a high enough current/power rating. Connector type: USB Type C (5 Gbps) Mating Connector: Standard USB 3.x Type A/C to Type C cable (5 Gbps min.) |
| Video and Control Mode DIP Switch (SW1) | The interface board is fitted with an 8-way DIP switch (SW1) to enable selection of camera video format on power-up, and VISCA camera control communication modes. See Harrier USB/HDMI Camera Interface Board datasheet for the configuration of the DIP switch elements. |
| VISCA Control: | The VISCA serial signal is routed through the interface board and to the camera. However, this serial signal is also connected to the camera interface board; extended VISCA commands (not used by the camera) may be used to control the interface board. For information on interface board operation using extended VISCA serial commands, refer to the Harrier USB/HDMI Camera Interface Board datasheet. |
| Physical and Environmental Details | |
| Power requirement | 9 – 15V DC. |
| Power consumption | Approx. 4.8W (typical@1080p60 with USB and HDMI outputs enabled). |
| Operating temperature | 0°C to +50°C. |
| Storage temperature | -20°C to +60°C. |
| Operating humidity | 10% to 90% (no condensation) |
| Dimensions (L x W x H) | 62.4mm x 56mm x 45.5mm (L x W x H). |
| Weight | 138g. |
