Harrier 10x AF-Zoom USB/HDMI
Compact and low-power camera option
Main > Product > Machine Vision Area Scan camera > Active Silicon Industrial Machine Vision Cameras > Harrier 10x AF-Zoom USB/HDMI
Harrier 10x AF-Zoom USB/HDMI
- USB 3.1 Gen1 camera solution with Tamron MP3010M-EV
- Simultaneous HDMI video output
- Compact and lightweight
- High-sensitive 5MP 1/2.8-type Sony IMX335 STARVIS CMOS sensor
- Supports all HD modes up to 1080p60
- 10x optical zoom – digital zoom up to 16x
- Shutter speed 1/1 to 1/10,000 sec
- Dimensions (L x W x H): 59 x 39 x 43mm
- Remote camera control (VISCA) via TTL/RS-232/RS-485 comms port or USB 3.1 (UVC) port
- Video output mode selected by DIP switches, UVC or VISCA control (over serial or USB connection)
- Power supply over USB cable capability
| Model | Harrier 10x AF-Zoom USB/HDMI |
|---|---|
| Image sensor | 1/2.8-type Sony IMX335 STARVIS CMOS sensor (progressive scan) |
| Effective no. of pixels | approx. 5.14M pixels |
| Pixel output (H x V) | 1920 x 1080; 1280 x 720 |
| Video format (HD) | 1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/29.97, 1080p/25, 720p/60, 720p/59.4, 720p/50, 720p/30, 720p/29.97, 720p/25 |
| Minimum illumination | 0.1 Lux (1/30sec, F1.8, 50%, Color, Typical) 0.025 Lux (1/30sec, F1.8, 50%, B&W, Typical) |
| Recommended illumination | 100 Lux to 100,000 Lux |
| S/N ratio | More than 50dB |
| Gain | Auto / Manual |
| Shutter speed | 1/1 to 1/10,000 sec |
| Sync system | Internal |
| Exposure compensation | -12dB to +12dB (total 13 steps) |
| Backlight compensation | ON / OFF |
| Gamma | 4 gamma curves (standard, straight, narrow, wide) |
| Aperture control | 16 steps |
| White balance | ATW1 (Narrow), ATW2 (Wide), One push, Manual (B, R), Indoor, Outdoor |
| AE (Auto exposure mode) | Auto, Manual, Priority Mode (shutter / iris) |
| Lens (wide to tele) | 10x optical zoom, f=3.3 ~ 33mm, F1.8 ~ 3.4 |
| Zoom mode | Standard / Variable / Direct |
| Zoom movement speed (wide to tele) | 1.7 sec (focus tracking ON) |
| Digital zoom | Up to 16x |
| Focusing system | Auto, Manual, One Push, AF Sensitivity |
| Horizontal viewing angle (wide to tele) | 59.2° (w) ~ 6.7° (t) (except when EIS is operated) |
| Minimum object distance (wide to tele) | Visible light: 10mm (wide) ~ 800mm (tele) 850nm: 10mm (wide) ~ 1200mm (tele) |
| Camera Functions | |
| EIS (Electronic Image Stabilization) | OFF/ON |
| Wide-dynamic range (Gamma) | OFF/ON |
| Day/Night (ICR) | OFF/ON/AUTO |
| Defog | OFF/ON (Level: 1~3) |
| Noise reduction (3D + 2D) | OFF/ON (Level: 1~5) |
| Privacy zone mask | Up to 8 places |
| Slow shutter | OFF/ON (max 1 sec) |
| Picture effects (black white) | OFF/ON |
| Picture freeze | OFF/ON |
| Electronic flip (e-flip) | OFF/ON |
| Mirror image | OFF/ON |
| Temperature readout | Available |
| Title display | OFF/ON (20 characters/line, max. 12 lines) |
| Connector Specifications Harrier USB/HDMI Camera Interface Board | |
| KEL30 Connector (J1) | The interface board is fitted with a 30-way miniature connector to link to the matching connector on the camera. Connector type: KEL USL00-30L. Mating cable: A 100mm 30-way micro coaxial cable (AS-CIB-USL30-100MM) is supplied with the camera. Different lengths are available. |
| Input/Output Connector (J2) | The interface board is fitted with an industry standard 4-way connector for VSync/PWM signal output and test pattern/reset control inputs. Connector type: JST SM04B-SRSS-TB Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-003-A (see ordering information below). See Harrier USB/HDMI Camera Interface Board datasheet for pin assignments and control options. |
| Power and Control Connector (J3) | The interface board is fitted with an industry standard 10-way connector for power and serial control. Connector type: JST SM10B-SRSS-TB Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-003-A (see ordering information). See Harrier USB/HDMI Camera Interface Board datasheet for pin assignment and output options. |
| JTAG Connector (J4): | Test connector used in manufacturing for circuit verification. |
| HDMI Output Connector (J5) | The interface board is fitted with a micro HDMI display output connector. HDMI output is active when an HDMI cable is connected. Connector type: HDMI Type D (micro). Mating Connector: Standard micro HDMI cable. There is an additional HDMI video output directly on the camera body. |
| USB 3 Connector (J6) | This USB Type C connector provides a USB Video Class (UVC) v1.1 video stream for connection to a host PC. The connector also provides a UVC control port for camera control (optional). It can also provide power to the camera or board if the USB connection has a high enough current/power rating. Connector type: USB Type C (5 Gbps) Mating Connector: Standard USB 3.x Type A/C to Type C cable (5 Gbps min.) |
| Video and Control Mode DIP Switch (SW1) | The interface board is fitted with an 8-way DIP switch (SW1) to enable selection of camera video format on power-up, and VISCA camera control communication modes. See Harrier USB/HDMI Camera Interface Board datasheet for the configuration of the DIP switch elements. |
| VISCA Control: | The serial communication is routed through the interface board directly to the camera. However, this serial signal is also connected to the camera interface board; extended VISCA commands (not used by the camera) may be used to control the interface board. For information on interface board operation using extended VISCA serial commands, refer to the Harrier USB/HDMI Camera Interface Board datasheet. |
| Additional Information | The HarrierControl camera software can be used to configure custom camera features on the Harrier USB/HDMI Camera Interface Board over the USB or serial connection. |
| Physical and Environmental Details | |
| Power requirement | 8V to 12V DC +/- 10% |
| Power consumption | approx. 3.5W (approx. 5.4W during motor operation – zoom and focus) |
| Operating temperature | 0°C to +60°C (recommended: 0°C to +40°C) |
| Storage temperature | -40°C to +60°C |
| Operating humidity | 20% to 80% (no condensation) |
| Storage humidity | 20% to 90% (no condensation) |
| Dimensions (L x W x H) | 70 x 38 x 43mm (L x W x H) dimensions of AS-CIB-IP-001-3010-A (regular) and AS-CIB-IP-002-3010-A (WiFi) 82 x 38 x 43mm (L x W x H) dimensions of AS-CIB-IP-003-3010-A (PoE) and AS-CIB-IP-004-3010-A (PoE, WiFi) |
| Weight | 112g |
