Leading Distributor for Machine Vision Components and Technologies in SEA

Harrier 36x AF-Zoom HDMI

Compact and low-power camera option

Harrier 36x AF-Zoom USB_HDMI

Harrier 36x AF-Zoom HDMI

Harrier 36x AF-Zoom USB_HDMI

The Harrier 36x AF-Zoom HDMI Camera offers a potent 36x optical zoom / 32x digital zoom with SMPTE 274M and SMPTE 296M compliant HDMI video output supporting HD modes up to 1080p30. Equipped with a global shutter CMOS sensor, it ensures distortion-free capture of moving objects. HDMI output activation occurs with an HDMI cable connection, while DIP switch settings enable camera video mode selection upon power-up. Control options include TTL serial communication. Special features encompass Digital Image Stabilization, Noise Reduction, Privacy Mask Function, Intelligent Motion Detection, and Day & Night mode (Infrared Cut filter Removal, ICR), enhancing its functionality.

 

Key Features

  • Full HD high resolution autofocus-zoom camera with HDMI video output.
  • 36x optical zoom, 32x digital zoom.
  • 1/2.3-type Sony Pregius IMX392LQR-C CMOS sensor (global shutter).
  • Supports all HD modes up to 1080p30.
  • External trigger and strobe out capability.
  • Camera control using VISCA™ protocol over TTL serial.
  • Video output mode selected by DIP switches or VISCA control.
Vital Vision Pte Ltd logo 2022
ModelHarrier 36x AF-Zoom HDMI
Image sensor1/2.3-type Sony Pregius IMX392LQR-C CMOS sensor (global shutter)
Effective no. of pixelsApprox. 2,350,000 pixels
Video format (HD)UVC 1.1 and HDMI 1.4: 1080p/30/25 fps, 720p/60/50/30/25 fps
Camera LVDS : 1080p/60/50/30/25 (single LVDS only), 720p/60/50/30/25
Analog resolutionCVBS
Minimum illuminationColor(1/30s, 48dB) : 0.3 lux , Color DSS(1/2s, 48dB) : 0.06 lux
S/N ratiomore than 50dB (AGC off)
Gain control (AGC)0 – 10 steps
Shutter speed1/30(25) – 1/20,000 sec
Sync systemInternal
DSSOff / 2x / 4x / 8x / 16x / 32x (/64x : 60 or 50fps mode only)
White balanceAuto, One Push, Manual, Indoor, Outdoor
AE (Auto exposure mode)Auto, lris Priority, Shutter Priority, Manual
Lens (wide to tele)Optical x36 Zoom, f=6mm to 216mm, F1.5 (wide) to F4.8 (tele)
Digital zoomOFF / MAX 1x – 32x
Focusing systemAuto / One Push / Manual
Viewing angle (FOV)FOV D H V Wide 59.1° 52.6° 31.1° Tele 2.3° 2.0° 1.1°
Minimum object distance (wide to tele)100mm (wide) to 1500mm (tele)
Control protocolSerial VISCA over TTL.
Pelco-D / Pelco-P.
Baud rate9600 / 19200 / 38400 / 115200
Camera Functions
Day & Night modeDay / Night
Digital Noise ReductionOFF / Low / Middle / High / Auto
Digital Image StabilizationAvailable
High/Back Light Compensation (HLC/BLC)Off / BLC / HLC
DefogAvailable
Motion detectionDetection OFF / 3 positions
Privacy maskMask OFF / 8 positions
Defect detectionDetection ON/OFF
Connector specifications
KEL30 Connector (J1)The interface board is fitted with a 30-way miniature connector to link to the matching connector on the camera.
Connector type: KEL USL00-30L.
Mating cable: KEL USL20-30SS-010-C (100mm length) or KEL USL20-30SS-005-C (50mm length) 30-way micro coaxial cable. This cable can be supplied with the interface board (see ordering information). Other lengths also available (subject to minimum order quantities).
Input/Output Connector (J2)The interface board is fitted with an industry standard 4-way connector for Vsync/PWM signal output and test pattern/reset control inputs.
Connector type: JST SM04B-SRSS-TB
Mating cable: Suitable cable can be purchased as part of a cable kit (see order information tab).
See datasheet for pin assignments and control options.
Power and Control Connector (J3)The interface board is fitted with an industry standard 10-way connector for power and serial control.
Connector type: JST SM10B-SRSS-TB
Mating cable: Suitable cable can be purchased as part of a cable kit (see order information tab).
See datasheet for pin assignment and output options.
JTAG Connector (J4):Test connector used in manufacturing for circuit verification.
HDMI Output Connector (J5)The interface board is fitted with a micro HDMI display output connector. HDMI output is active when an HDMI cable is connected.
Connector type: HDMI Type D (micro).
Mating Connector: Standard micro HDMI cable.
Video Mode DIP Switch (SW1)The interface board is fitted with an 8-way DIP switch (SW1) to enable selection of camera video format on power-up. Switches 5-8 are reserved for future use. See datasheet for the configuration of the DIP switch elements.
General
Power requirement9 – 15V DC
Power consumption7.6W (typical)
Operating temperature0°C to +50°C
Storage temperature-20°C to +60°C
Operating humidity0% to 90% (no condensation)
Dimensions (L x W x H)137 x 55.6 x 65.5mm
Weight452g

Area Scan Camera Finder

Camera Finder

Click to search now

Line Scan Camera Finder

linescan Finder round 220 pix

Click to search now

Machine Vision Lens Finder

Click to search now

Machine Vision Lighting Finder

Click to search now