Harrier 40x AF-Zoom 3G-SDI
Compact and low-power camera option
Main > Product > Machine Vision Area Scan camera > Active Silicon Industrial Machine Vision Cameras > Harrier 40x AF-Zoom 3G-SDI
Harrier 40x AF-Zoom 3G-SDI
- Full HD high resolution autofocus-zoom camera.
- Video output: 3G-SDI/HD-SDI/HD-VLC/CVBS
- 1/2.8-type 2MP Sony IMX462 STARVIS CMOS sensor.
- Video formats (HD): 1080p – 60/30 fps, 720p – 60/30 fps.
- 40x Optical Zoom & 32x Digital Zoom.
- Shutter speed 1/30(25) – 1/30,000 sec.
- HD-VLC™ output mode for long cable length applications.
- TTL/RS-232 Serial VISCA, Pelco – D/P Control Protocol.
- Single VISCA programmable 3.3V PWM output channel.
- Video mode selection switches and built-in test pattern.
- Simultaneous analog (PAL/NTSC) when in 720p50/59.94/60 modes.
| Model | Harrier 40x AF-Zoom 3G-SDI |
|---|---|
| Video output | HD: 3G-SDI, HD-SDI, HD-VLC Analog: CVBS |
| Image sensor | 1/2.8-type Sony IMX462 STARVIS CMOS sensor |
| Effective no. of pixels | Approx. 2,120,000 pixels |
| Sync system | Internal |
| Video format (HD) | 1080p 60(50)/30(25)fps, 720p 60(50)/30(25)fps |
| Analog resolution | CVBS |
| Minimum illumination | Color(1/30s, 79.5dB) : 0.01 lux , BW(1/30s, 79.5dB) : 0.002 lux Color DSS(1/1s, 79.5dB) : 0.001 lux , BW DSS(1/1s, 79.5dB) : 0.0002 lux |
| S/N ratio | more than 50dB (AGC off) |
| Lens Type | 40x Day & Night Zoom Lens |
| Zoom Ratio | Optical 40x, Digital 32x Zoom |
| Lens (wide to tele) | Optical x40 Zoom, f=4.25mm to 170 mm, F1.6 (wide) to F4.95 (tele) |
| Horizontal viewing angle (wide to tele) | 66.35° to 1.9° |
| Focusing system | Auto / One Push / Manual |
| Minimum object distance (wide to tele) | 0.1 – 10.0m (focus near limit range) |
| Zoom speed | 0 (Slow) – 7 (Fast) |
| Lens refresh | One Push / 1 – 10 Days |
| Digital zoom | OFF / MAX 2x – 32x |
| Zoom preset | 5 presets |
| AE (Auto exposure mode) | Auto, lris Priority, Shutter Priority, Manual |
| Gain control (AGC) | 0 – 10 steps |
| Shutter speed | 1/30(25) – 1/30,000 sec |
| Iris | Close – F1.6 |
| Digital Slow Shutter (DSS) | Off / 2x / 4x / 8x / 16x / 32x (x64: 60 or 50fps mode only) |
| Flickerless | Off / On / Auto |
| Brightness | 0 – 14 steps |
| Back Light | Off / BLC / HLC / WDR (BLC – Back Light Compensation HLC – High Light Compensation WDR – Wide Dynamic Range) |
| Day & Night | Auto / Day / Night / Ext-in |
| White balance | Auto, One Push, Manual, Indoor, Outdoor, Auto-Ext |
| Red gain | 0 – 100 steps (Manual mode only) |
| Blue gain | 0 – 100 steps (Manual mode only) |
| Chroma | 0 – 20 steps |
| Hue | 0 – 20 steps |
| System (analog) | NTSC / PAL |
| Control protocol | Serial VISCA Pelco-D / Pelco-P |
| Baud rate | 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200 |
| Camera Functions | |
| Digital Noise Reduction (DNR) | 2D/3D, 2D+3D (Level: 0 ~ 15 steps) |
| Mirror | Off / H / V / H&V |
| Sharpness | 0 – 15 steps |
| Contrast | 0 – 20 steps |
| Image Bright | 0 – 20 steps |
| DWDR | Off / Manual / Auto (DWDR – Digital Wide Dynamic Range) |
| Defog | OFF / Manual / Auto |
| Freeze | OFF / ON |
| Gamma | 0.35 – 0.70 |
| Privacy mask | OFF / ON (8 masks) |
| Motion detection | OFF / ON (4 regions) |
| DIS | OFF / ON (DIS – Digital Image Stabilizer) |
| Defect detection | OFF / ON |
| Connector Specification - Harrier 3G-SDI Camera Interface Board | |
| KEL30 Connector (J1) | The interface board on the camera is fitted with a 30-way miniature connector to link to the video output connector on the camera. Connector type: KEL USL00-30L. Mating cable: A 30-way micro coaxial cable (AS-CIB-USL30-100MM) is supplied with the camera. Lengths available: KEL USL20-30SS-010-C (100mm length) or KEL USL20-30SS-005-C (50mm length). |
| Input/Output Connector (J2) | The interface board is fitted with an industry standard 4-way connector for Vsync/PWM signal output and test pattern/reset control inputs. Connector type: JST SM04B-SRSS-TB Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-002-B (see ordering information). See Harrier 3G-SDI Camera Interface Board datasheet for pin assignments and control options. |
| Power and Control Connector (J3) | The interface board on the camera is fitted with an industry standard 9-way connector for power, serial control and analog video out. Connector type: JST SM09B-SRSS-TB Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-002-B (see ordering information). See Harrier 3G-SDI Camera Interface Board datasheet for pin assignments and output options. |
| Analog Video Out (Pin 3, J3) | Standard resolution composite analog is simultaneously available in HD modes 720p50 (for PAL) and 720p60/59.94 (for NTSC). There are two options for the analog output, selectable via serial control: (a) the 1280 pixel wide HD image can be cropped to 960 wide, by cropping a 120 pixel strip off each side to make a 4:3 aspect ratio Standard Definition (SD) signal. (b) by pre-warping the image, such that when displayed on a HD monitor in the monitor’s stretch-to-fit mode, the original full-width HD signal will be displayed correctly at 16:9 aspect ratio. Both methods ensure the displayed pixels remain square and that the image is not distorted. |
| 3G-SDI Output Connector (J5) | The interface board is fitted with a Hirose H.FL Micro Coaxial Connector (75 Ohm). Connector type: Hirose Micro Coaxial Connector (Receptacle), part number H.FL-R-SMT(01). Mating connector: Use mating cable with 75 Ohm characteristic impedance, for example Hirose part number H.FL75-2LP-084H-A-100. A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-002-B (see ordering information). |
| Video and Control Mode DIP Switch (SW1) | The interface board is fitted with a 4-way DIP switch to select various video output and control modes. The DIP switches to select the Video Format are read on power-up only. Therefore, to change mode using the DIP switches, power down the camera, set the switches and then power up the camera. DIP switches will only be effective for the operating modes supported by the camera currently in use. See Harrier 3G-SDI Camera Interface Board datasheet for the configuration of the DIP switch SW1. |
| Communications Mode Selection (SW2) | The interface board is also fitted with a 2-way DIP switch to select the serial communications standard. It allows to choose between RS-232 VISCA communications, RS-485 VISCA comms with RS-485 termination enabled, RS-485 VISCA comms with RS-485 termination disabled and TTL VISCA communications. See Harrier 3G-SDI Camera Interface Board datasheet for the details and configuration of the DIP switch SW2. |
| Digital Transmission Standard Selection (SW3) | The interface board is fitted with a 1-way DIP switch to select the SMPTE or HD-VLC digital output standards. OFF = SMPTE compliant output. ON = HD-VLC compressed output. |
| General | |
| Power requirement | 9 – 15V DC |
| Power consumption | Approx. 8W – Typical at 1080p/60, values will vary with camera/operating mode. |
| Operating temperature | -5°C to +50°C |
| Storage temperature | -20°C to +60°C |
| Operating humidity | 0% to 90% (no condensation) |
| Dimensions (L x W x H) | 115.5mm x 54mm x 65.5mm (L x W x H) |
| Weight | 389g |
