Harrier 55x AF-Zoom USB/HDMI
Compact and low-power camera option
Main > Product > Machine Vision Area Scan camera > Active Silicon Industrial Machine Vision Cameras > Harrier 55x AF-Zoom USB/HDMI
Harrier 55x AF-Zoom USB/HDMI
- Full HD high resolution autofocus-zoom camera.
- Simultaneous display of USB 3.1 Gen1 and HDMI display output.
- 1/2.8-type 5MP Sony IMX335 CMOS sensor.
- Video formats (HD): 1080p – 30/25 fps, 720p – 30/25 fps.
- 55x optical hybrid zoom & 32x digital zoom.
- Shutter speed 1/1 – 1/100,000 sec.
- Dimensions (L x W x H): 101 x 54 x 64 mm.
- TTL/RS-232/RS-485 Serial VISCA, Pelco – D/P Control Protocol, or USB 3.1 (UVC) port.
- Virtual COM port for VISCA Control over USB.
- Power supply over USB cable capability.
| Model | Harrier 55x AF-Zoom USB/HDMI |
|---|---|
| Video output | USB (UVC), HDMI |
| Image sensor | 1/2.8-type 5MP Sony IMX335 CMOS sensor |
| Active pixels | Approx. 5,130,000 pixels |
| Sync system | Internal |
| Video format (HD) | 1080p 30/25 fps, 720p 30/25 fps |
| Analog resolution | CVBS |
| Minimum illumination | Color(1/30s, 72.0dB) : 0.02 lux , BW(1/30s, 72.0dB) : 0.002 lux Color DSS(1/1s, 72.0dB) : 0.002 lux , BW DSS(1/1s, 72.0dB) : 0.0002 lux |
| S/N ratio | more than 50dB (AGC off) |
| Zoom Ratio | Hybrid optical zoom: 55x – optical zoom lens (40x) with additional sensor zoom feature to deliver 55x zoom. Digital Zoom: 32x |
| Lens (wide to tele) | Focal length: f=4.25mm to approx. 234mm Aperture Ratio: F1.6 (wide) to F4.95 (tele) |
| Angle of View (D, H, V) | Wide: 69.3°, 62.13°, 37.44° (D, H, V) Tele: 1.48°, 1.29°, 0.73° (D, H, V) |
| Focusing system | Auto / One Push / Manual / Auto-Ext |
| Minimum distance | 0.1 / 1.5 / 3.0 / 6.0 / 10.0 m |
| Digital zoom | MAX 32x |
| Exposure mode | Auto, lris Priority, Shutter Priority, Manual |
| Gain control (AGC) | 0 – 10 steps |
| Shutter speed | 1/1 – 1/100,000 sec |
| Iris | Closed – F1.6 |
| Digital Slow Shutter (DSS) | Off / 2x / 4x / 8x / 16x / 32x |
| Flickerless | Off / On / Auto |
| Brightness | 0 – 14 steps |
| Back Light | Off / BLC / HLC (BLC – Back Light Compensation, HLC – High Light Compensation) |
| Day & Night | Auto / Day / Night / Ext-in |
| White balance | Auto, One Push, Manual, Indoor, Outdoor, Auto-Ext |
| System (analog) | NTSC / PAL |
| Control protocol | Serial VISCA Pelco-D / Pelco-P |
| Baud rate | 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200 |
| Camera Functions | |
| Digital Noise Reduction (DNR) | 2D/3D, 2D+3D (Level: 0 ~ 15 steps) |
| Mirror | Off / H / V / H&V |
| Sharpness | 0 – 15 steps |
| DWDR | Off / Manual / Auto (DWDR – Digital Wide Dynamic Range) |
| Defog | OFF / Manual / Auto |
| Privacy mask | OFF / ON (8 masks) |
| Motion detection | OFF / ON (4 regions) |
| DIS | OFF / ON (DIS – Digital Image Stabilizer) |
| Defect detection | OFF / ON |
| Connector Specification - Harrier USB/HDMI Camera Interface Board | |
| KEL30 Connector (J1) | The interface board is fitted with a 30-way miniature connector to link to the video output connector on the camera. Connector type: KEL USL00-30L. Mating cable: A 30-way micro coaxial cable (AS-CIB-USL30-100MM) is supplied with the camera. Lengths available: KEL USL20-30SS-010-C (100mm length) or KEL USL20-30SS-005-C (50mm length). |
| Input/Output Connector (J2) | The interface board is fitted with an industry standard 4-way connector for VSync/PWM signal output and test pattern/reset control inputs. Connector type: JST SM04B-SRSS-TB Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-003-A (see ordering information below). See Harrier USB/HDMI Camera Interface Board datasheet for pin assignments and control options. |
| Power and Control Connector (J3) | The interface board is fitted with an industry standard 10-way connector for power and serial control. Connector type: JST SM10B-SRSS-TB Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-003-A (see ordering information below). See Harrier USB/HDMI Camera Interface Board datasheet for pin assignment and output options. |
| HDMI Output Connector (J5) | The interface board is fitted with a micro HDMI display output connector. HDMI output is active when an HDMI cable is connected. Connector type: HDMI Type D (micro). Mating Connector: Standard micro HDMI cable. |
| USB 3.0 Connector (J6) | This USB Type C connector provides a USB Video Class (UVC) v1.1 video stream for connection to a host PC. The connector also provides a UVC control port for camera control (optional). It can also provide power to the camera or board if the USB connection has a high enough current/power rating. Connector type: USB Type C (5 Gbps) Mating Connector: Standard USB 3.x Type A/C to Type C cable (5 Gbps min.) |
| Video and Control Mode DIP Switch (SW1) | The interface board is fitted with an 8-way DIP switch (SW1) to enable selection of camera video format on power-up, and VISCA camera control communication modes. See Harrier USB/HDMI Camera Interface Board datasheet for the configuration of the DIP switch elements. |
| General | |
| Power requirement | 9 – 15V DC |
| Power consumption | Max. 7.4W (540mA @12V DC), typical (no zoom/focusing @1080p30)~4.8W |
| Operating temperature | -10°C to +50°C |
| Storage temperature | -20°C to +60°C |
| Operating/storage humidity | 10% to 90% (no condensation) |
| Dimensions (L x W x H) | 114.5mm x 54mm x 65.5mm (L x W x H) |
| Weight | 393g |
