Optronis CP70-16-M-148
A very high resolution of 16 MegaPixel camera
Main > Product > Area Scan camera > CoaXpress Cameras > CP70-16-M-148
Optronis CP70-16-M-148
The camera from the CamPerform-CP series integrates the LUX160 sensor offering a very high resolution of 16 MegaPixel. Up to 148 frames/sec at full Resolution can be captured. Reducing the readout area in vertical or also in horizontal direction allows to strongly increase frame rate. This flexibility makes the camera an ideal component for a variety of applications like 2D- and 3D-metrology or motion analysis.
The signal processing inside the camera is optimized for low readout noise. Signal gain and offset can be adjusted. A hot-pixel-correction further improves image quality. The sensor, operating in global shutter mode, is available in a monochrome and color version.
| CP70-16-M/C-148 | |
|---|---|
| Sensor Resolution | 4672 X 3416 |
| Frame Rate | 148 frames per sec. |
| Highest Frame Rate | 988 frames per sec. |
| Interface | CoaxPress 1.1 |
| Increase of Frame Rate | Yes |
| Reduction of Sensor Resolution | Horizontal / vertical |
| Sensor | LUX160 |
| Sensor Type | CMOS Global Shutte |
| Sensor Pixel / Distance between Pixels | 3.9 µm / square |
| Sensor Size | 22.572 mm |
| Sensor Format | 4/3” |
| Lens Mount (option) | C-Mount, Nikon F-Mount, Nikon F-Mount (for G-series), M42 |
| Features | GenCam, EMVA 1288 |
| Cable | 75 Ohm coaxial, (e.g. RG59, RG6, RG11) Long Cable Lengths: In excess of 100 m (without any hubs, repeaters etc.) Low cost assembly and easy integration in moving arm applications |
| Trigger | Real time data transfer, control and trigger Low jitter and low latency |
| Bandwith | 6,25 GBit/s; Scalable up to 4 channels with 25 GBit/s in total |
| Power | Power over CoaXPress up to 13 Watt (PoCXP) |
| Protocol | Automatic Link Detection with Frame Grabber. GenICam Standard(XML file support and Plug & Play for machine vision) |
| Connectors | Standard BNC or DIN 1.0/2.3 |
Mechanical Dimension CP70 housing with F-Mount
