Optronis CP90-25-M-72
25 megapixel monochrome or colour On-Semi image sensor camera
Main > Product > Area Scan camera > CoaXpress Cameras > CP90-25-M-72
Optronis CP90-25-M-72
The CP90-25-M/C camera is optionally equipped with a 25 megapixel monochrome or colour On-Semi image sensor. An outstanding feature, in addition to the high image refresh rate in global shutter mode, is the large quantum well (compared to other sensors), allowing a high signal-to-noise ratio. This means that the image appears particularly contrast-rich. The A/D converter depth is optionally 8 bit or 10 bit. The CP90-25-M/C-72 cameras are specified to EMVA1288 and tested for consistent image quality.
| CP90-25-M-72 / CP90-25-C-72 | |
|---|---|
| Sensor Resolution | 5,120 x 5,120 |
| Frame Rate | 72 frames per sec. |
| Highest Frame Rate | 729 frames per sec. |
| Interface | CoaxPress |
| Increase of Frame Rate | yes |
| Reduction of Sensor Resolution | horizontal / vertical |
| Sensor | VITA25k Global Shutter CMOS |
| Sensor Pixel / Distance between Pixels | 4,5 µm / square |
| Sensor Size | 35 mm |
| Lens Mount (option) | C-Mount, Nikon F-Mount, Nikon F-Mount (for G-series), M42 |
| Features | GenCam, EMVA 1288 |
| Cable | 75 Ohm coaxial, (e.g. RG59, RG6, RG11) Long Cable Lengths: In excess of 100 m (without any hubs, repeaters etc.) Low cost assembly and easy integration in moving arm applications |
| Trigger | Real time data transfer, control and trigger Low jitter and low latency |
| Bandwith | 6,25 GBit/s; Scalable up to 4 channels with 25 GBit/s in total |
| Power | Power over CoaXPress up to 13 Watt (PoCXP) |
| Protocol | Automatic Link Detection with Frame Grabber. GenICam Standard(XML file support and Plug & Play for machine vision) |
| Connectors | Standard BNC or DIN 1.0/2.3 |
Mechanical Dimension CP90 Housing with F-Mount
