V2U3-PCIE1XG205
2-port USB 3.0 to PCI Express x1 Gen2 Host Card
Main > Product > Frame Grabbers & Interface Cards > USB3 Frame Grabber > PCIe x1 > V2U3-PCIE1XG205
V2U3-PCIE1XG205
V2U3-PCIE1XG205 is a 2-port USB 3.0 to PCI Express x1 Gen 2 Host Card. The V2U3-PCIE1XG205 complies with Universal Serial Bus 3.0 Specification, and Intel’s eXtensible Host Controller Interface (xHCI). The V2U3-PCIE1XG205 uses a PCI Express bus interface, and it is applicable for PCI Express solutions with host PC systems. The V2U3-PCIE1XG205 supports data transfer up to 5 Gbps when connecting to USB 3.0 compliant peripherals, while maintaining compatibility with existing USB peripheral devices.
The Highlight Features
- Host Bus: PCIe x1 Gen 2 (5 Gb/s) ; Low Profile PCI Form Factor
- Compliant with PCI Express Base Specification Revision 2.0
- 2-port USB 3.0 Host Controller (Renesas uPD720202, USB IF TID 380000043)
- Compliant with Universal Serial Bus 3.0 specification Revision 1.0
- Compliant with Intel’s eXtensible Host Controller Interface (xHCI) specification Revision 1.0
- Supports UASP (USB Attached SCSI Protocol)
- USB Bus Power
- From PCIe 12V (1.3MHz fixed frequency PWM synchronous step-down regulator)
- From Power Connector (IDE 4-pin or SATA 15-pin)
- USB 3.0 Cable Ports (A-type Receptacle, USB IF TID 360000145)
- Provides USB 3.0 Vision Standard cable port lock mechanism
| Model | V2U3-PCIE1XG205 |
|---|---|
| PCIe Host Bus | Compliant with PCI Express Base Specification Revision 2.0 Supports PCI Express Card Electromechanical Specification Revision 2.0 Compliant with Intel’s eXtensible Host Controller Interface (xHCI) Specification Revision 1.0 Supports PCI Bus Power Management Interface Specification Revision 1.2 Operational registers are direct-mapped to PCI memory space Supports Serial Peripheral Interface (SPI) type ROM |
| USB Features | Supports two downstream ports for all speeds Supports all USB compliant data transfer types as follows; Control / Bulk / Interrupt / Isochronous transfer Compliant with USB 3.0 Specification Revision 1.0 Each USB port supporting SS/HS/FS/LS data rates (5Gbps/480Mbps/12Mbps/1.5Mbps) Supports USB Battery Charging Specification Revision 1.2 for Charging Downstream Ports (CDP). Supports UASP (USB Attached SCSI Protocol) |
| USB Data Transfer Rate | Low-speed (1.5 Mbps) Full-speed (12.0 Mbps) High-speed (480.0 Mbps) Super-speed (5.0 Gbps) |
| Number of USB Ports | 1-port: U3-PCIE1XG205P1-10 2-port: U3-PCIE1XG205-10/U3-PCIE1XG205-1A/U3-PCIE1XG205-1S |
| USB3 cable lock mechanism | Provides the threaded holes for the jack-screws of USB 3.0 A Plug w/Jackscrew lock Cable |
| USB Bus Power Input | V2U3-PCIE1XG205-10/P1-10: USB bus power is from PCIe 12V (Step-Down) V2U3-PCIE1XG205-1A/1S: USB bus power may from the following source (A or B): A. From PCIe 12V (Step-Down) B. From Power Connector 5V only (IDE 4-pin or SATA 15-pin) U3-PCIE1XG205-1A: Big IDE 4-pin DC Power Connector U3-PCIE1XG205-1S: SATA 15-pin Power Connector |
| Operating Environment Temperature | Temperature: 5 to 60 degrees Celsius (41 to 140 degrees Fahrenheit) Humidity : 10% to 80% (Non-Condensing) |
- Computer with PCI Express slot (x1, x4, x8, x16)
Note:
For the best performance (5.0 Gbps), It should be installed in a PCIe Gen 2 compliant slot in the host computer. Most computers have PCIe Gen 2 (5.0 Gbps) throughput on x8 or x16 slots.
A PCIe Gen 1 compliant slot reaches up to 2.5 Gbps throughput
- If OS is Windows 8 or later , there are inbox driver for Renesas USB 3.0 Host Controller. OS will detect the presence of new hardware and then install Renesas USB 3.0 Host Controller driver automatically.
- USB 3.0 Host Drivers Kit (x86 and x64) for
- Windows XP
- Windows Vista
- Windows 7
- Windows Server 2008 Release 2
- CE Test: Pass
- UKCA Test: Pass
- FCC Test : Pass
- VCCI Test: Pass
- RCM Test: Pass
- 64mm(H)x65mm(L)
- NW: 36g
