Harrier 40x AF-Zoom USB/HDMI
Compact and low-power camera option
Main > Product > Machine Vision Area Scan camera > Active Silicon Industrial Machine Vision Cameras > Harrier 40x AF-Zoom USB/HDMI
Harrier 40x AF-Zoom USB/HDMI
- Full HD high resolution autofocus-zoom camera.
- Simultaneous display of USB 3.1 Gen1 and HDMI display output.
- 1/2.8-type 2MP Sony IMX462 STARVIS CMOS sensor.
- Video formats (HD): 1080p – 60/30 fps, 720p – 60/30 fps.
- 40x Optical Zoom & 32x Digital Zoom.
- Effective number of pixels approx. 2,120,000.
- Shutter speed 1/30(25) – 1/30,000 sec.
- TTL/RS-232/RS-485 Serial VISCA, Pelco – D/P Control Protocol, or USB 3.1 (UVC) port.
- Virtual COM port for VISCA Control over USB.
- Power supply over USB cable capability.
Model | Harrier 40x AF-Zoom USB/HDMI |
---|---|
Image sensor | 1/2.8-type Sony IMX462 STARVIS CMOS sensor |
Effective no. of pixels | Approx. 2,120,000 pixels |
Analog resolution | CVBS |
Sync system | Internal |
Video format (HD) | UVC 1.1 and HDMI 1.4: 1080p 60(50)/30(25)fps, 720p 60(50)/30(25)fps |
Analog resolution | CVBS |
Minimum illumination | Color(1/30s, 79.5dB) : 0.01 lux , BW(1/30s, 79.5dB) : 0.002 lux Color DSS(1/1s, 79.5dB) : 0.001 lux , BW DSS(1/1s, 79.5dB) : 0.0002 lux |
S/N ratio | more than 50dB (AGC off) |
Lens Type | 40x Day & Night Zoom Lens |
Zoom Ratio | Optical 40x, Digital 32x Zoom |
Lens (wide to tele) | Optical x40 Zoom, f=4.25mm to 170 mm, F1.6 (wide) to F4.95 (tele) |
Horizontal viewing angle (wide to tele) | 66.35° to 1.9° |
Focusing system | Auto / One Push / Manual |
Minimum object distance (wide to tele) | 0.1 – 10.0m (focus near limit range) |
Zoom speed | 0 (Slow) – 7 (Fast) |
Lens refresh | One Push / 1 – 10 Days |
Digital zoom | OFF / MAX 2x – 32x |
Zoom preset | 5 presets |
Exposure mode | Auto, lris Priority, Shutter Priority, Manual |
Gain control (AGC) | 0 – 10 steps |
Shutter speed | 1/30(25) – 1/30,000 sec |
Iris | Close – F1.6 |
Digital Slow Shutter (DSS) | Off / 2x / 4x / 8x / 16x / 32x (x64: 60 or 50fps mode only) |
Flickerless | Off / On / Auto |
Brightness | 0 – 14 steps |
Back light | Off / BLC / HLC / WDR (BLC – Back Light Compensation, HLC – High Light Compensation, WDR – Wide Dynamic Range) |
Day & Night | Auto / Day / Night / Ext-in |
White balance mode | Auto, One Push, Manual, Indoor, Outdoor, Auto-Ext |
Red gain | 0 – 100 steps (Manual mode only) |
Blue gain | 0 – 100 steps (Manual mode only) |
Chroma | 0 – 20 steps |
Hue | 0 – 20 steps |
System (analog) | NTSC / PAL |
Control protocol | Serial VISCA (RS-485/RS-232/TTL/USB – via the Harrier Serial COM port). Pelco-D / Pelco-P USB interface (UVC) |
Baud rate | 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200 |
Camera Functions | |
Digital Noise Reduction (DNR) | 2D/3D, 2D+3D (Level: 0 ~ 15 steps) |
Mirror | Off / H / V / H&V |
Sharpness | 0 – 15 steps |
Contrast | 0 – 20 steps |
Image Bright | 0 – 20 steps |
DWDR | Off / Manual / Auto (DWDR – Digital Wide Dynamic Range) |
Defog | OFF / ON (Auto / Manual) |
Freeze | OFF / ON |
Gamma | 0.35 – 0.70 |
Privacy mask | OFF / ON (8 masks) |
Motion detection | OFF / ON (4 regions) |
DIS | OFF / ON (DIS – Digital Image Stabilizer) |
Defect detection | OFF / ON |
Connector Specification - Camera Interface Board | |
KEL30 Connector (J1) | The interface board is fitted with a 30-way miniature connector to link to the video output connector on the camera. Connector type: KEL USL00-30L. Mating cable: A 30-way micro coaxial cable (AS-CIB-USL30-100MM) is supplied with the camera. Lengths available: KEL USL20-30SS-010-C (100mm length) or KEL USL20-30SS-005-C (50mm length). |
Input/Output Connector (J2) | The interface board is fitted with an industry standard 4-way connector for VSync/PWM signal output and test pattern/reset control inputs. Connector type: JST SM04B-SRSS-TB Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-003-A (see ordering information below). See Harrier USB/HDMI Camera Interface Board datasheet for pin assignments and control options. |
Power and Control Connector (J3) | The interface board is fitted with an industry standard 10-way connector for power and serial control. Connector type: JST SM10B-SRSS-TB Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-003-A (see ordering information below). See Harrier USB/HDMI Camera Interface Board datasheet for pin assignment and output options. |
HDMI Output Connector (J5) | The interface board is fitted with a micro HDMI display output connector. HDMI output is active when an HDMI cable is connected. Connector type: HDMI Type D (micro). Mating Connector: Standard micro HDMI cable. |
USB 3.0 Connector (J6) | This USB Type C connector provides a USB Video Class (UVC) v1.1 video stream for connection to a host PC. The connector also provides a UVC control port for camera control (optional). It can also provide power to the camera or board if the USB connection has a high enough current/power rating. Connector type: USB Type C (5 Gbps) Mating Connector: Standard USB 3.x Type A/C to Type C cable (5 Gbps min.) |
Video and Control Mode DIP Switch (SW1) | The interface board is fitted with an 8-way DIP switch (SW1) to enable selection of camera video format on power-up, and VISCA camera control communication modes. See Harrier USB/HDMI Camera Interface Board datasheet for the configuration of the DIP switch elements. |
General | |
Power requirement | 9 – 15V DC |
Power consumption | 8.9W typical @1080p60 with USB and HDMI active. |
Operating temperature | 0°C to +50°C |
Storage temperature | -20°C to +60°C |
Operating humidity | 0% to 90% (no condensation) |
Dimensions (L x W x H) | 114.5mm x 54mm x 65.5mm (L x W x H) |
Weight | approx. 393g |