Lighting Intensity Controllers
Light intensity Control (LiC)
The LIC series is split into four areas:
- Starting with LIC-VA, which meets basic requirements and can be easily integrated into applications.
- Then we have our latest product, LIC-CA2.
- The mid-range of the series - as measured by the technical specification - is represented by the models LIC-2256, LIC-4256,as well as LIC-8 and LIC-16.
- As a new addition to the line, LIC-S is specifically intended for„shape from shading“ applications.
LIC-CA2 provides 2 controllable output with selectable current and adjustable intensity. It is able to configure in continuous or strobe mode and CH1 and CH2 are able to take 2 input signals individually.
The trigger signals can have 5V or 24V levels. The LIC-VA has switchover times between 2μs and 5μs. In spite of its short switchover times, the LIC-VA is able to control up to 48V and 10 ampere per output in strobe mode.
In contrast to the LIC-VA the light intenity controllers LIC-X256N, LIC-8 and LIC-16 offer the possibility of communication. Via RS232-interface individual output-channels can be controlled.
The LIC-S is a controller with the ability to cost-effectively implement „shape from shading“ systems. Starting with the trigger signal from a camera or PLC, it continuously switches its outputs.