Toshiba Teli EX370BMG-X
CoaXPress 2.0 Camera EX series (CMOS, High performance)
Main > Product > Area Scan camera > CoaXpress Cameras > EX370BMG-X
Toshiba Teli EX370BMG-X
The EX Series is an integrated camera with a CoaXPress 2.0 interface. Incorporating a 37.7MP CMOS sensor, the EX Series provides a wide field of view. The use of the CXP-12 Quad allows the high-speed transfer of images. Measuring only 60 mm square, the chassis can be installed easily. The lens-mountless structure makes it possible to use different lenses according to the application requirements.
| Model | EX370BMG-X |
|---|---|
| Interface | CoaXPress2.0 |
| Resolution | 37.7M |
| Imager | CMOS image sensor |
| Imager model | EV2S36MB |
| Resolution | 6,144(H) x 6,144(V) |
| Frame rate | 120 fps (CXP-12 Quad, Mono 8bit) 42.1 fps (CXP-6 Quad, Mono 8bit) 21 fps (CXP-12, Mono 8bit) 10.7 fps (CXP-6, Mono 8bit) |
| Pixel size | 2.5μm x 2.5μm |
| Scanning are | 15.36mm(H) x 15.36mm(V) |
| Image size | 4/3 type |
| Aspect ratio | 1:1 |
| Scanning | Progressive |
| Electronic shutter method | Global shutter |
| Random Trigger Shutter Type | External Trigger / Software Trigger / Link Trigger |
| Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) |
| Sequential Shutter | 16 entry (max) |
| Exposure Time | MANUAL : 10μs to 16s Random Trigger Shutter : 10μs to 1s (Edge or Bulk mode), 200μs to Trigger width (Level mode) |
| Synchronization System | Internal |
| Optical glass/filter | Dust-proof glass |
| Sensitivity | 2,350 lx (F5.6, 1/125s) |
| Minimum illuminance | 2 lx (F1.4, Gain: +36dB, Video level: 50%) |
| Gain | MANUAL : 0 to +36dB |
| Black Level | -25% to +25% |
| LUT | In 12bit, Out 12bit |
| Image Output Format | Mono12, Mono10, Mono8 |
| Readout Mode | All pixel, ROI, Binning, Mirroring, Flip |
| External trigger input | "Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 200μs (minimum) |
| Power supply | PoCXP / DC+24V (18.5V to 26V) (HIROSE connector) |
| Power consumption | 13.6W max. |
| Lens mount | Mountless (Φ50 H7) |
| External dimension | 60(W) x 60(H) x 80(D) mm (Not including protruding parts) |
| Mass | approx. 280g |
| Operation temperature | 0°C to 40°C (below 60°C on cabinet surface, below 75°C on Imager surface) |
| Operation humidity | 10% to 90% (no condensation) |
| Conformity | CE, FCC, RoHS, WEEE, CoaXPress 2.0, GenICam, IIDC2 |
