Leading Distributor for Machine Vision Components and Technologies in SEA

V2U3X8-PCIE8XE111

Octad Channel 32-port (4-port x 8) USB 3.0 to PCI Express x8 Gen 2 Host Card

V2U3X8-PCIE8XE111

The V2U3X8-PCIE8XE111 is an Octad channel 32-port (4-port x 8) USB 3.0 to PCI Express x8 Gen 2 Host Card.

V2U3X8-PCIE8XE111 is integrated by the following three key parts (IP8X-PCIE8XG201,DU3X2-IPCIE2XG211, CB-00592).

  • V2IP8X-PCIE8XG201
    • Internal eight PCIe x1 to PCIe x8 Gen 2 Switch Host Card.
  • Two V2DU3X2-IPCIE2XG211
    • Four PCI Express x1 to USB 3.0 Single Chip Host Controllers ( FRESCO FL1100; USB IF TID 380000026).
  • Four V2CB-00592

Utilizing the standard PCI Express Switch, the 16-Lane/16-Port PCI Express Switch provides the most efficient fan-out solution for integrating Sixteen PCI Express to USB 3.0 Single Chip Host controllers into a small board design. Each USB 3.0 to PCI Express Single Chip Host controller takes advantages of 5 Gbps burst rate of 8-lane PCI Express bus in both directions and is fully compliant with PCI Express Base specification r2.0. This solution provides full PCI Express and USB 3.0 functionality and performance.

The Highlight Features
  • Host Bus: PCIe x8 Gen 2 (40.0 Gb/s)
    • Compliant with PCI Express Base Specification Revision 2.0
  • Eight independent USB 3.0 Host Controllers
    • Compliant with Universal Serial Bus 3.0 specification Revision 1.0
    • Compliant with Intel’s eXtensible Host Controller Interface (xHCI) specification Revision 1.0
    • USB 3.0 Host Controller supports four downstream ports
  • thirty-two USB 3.0 Cable Ports (A-type Receptacle)
    • Provides USB 3.0 cable port lock mechanism


    USB 3.0 Standard A-type lock mechanism

  • Dual 5.25″ ODD Form Factor (DU3X2-IPCIE2XG211 )
Vital Vision Pte Ltd logo 2022
ModelV2U3X8-PCIE8XE111
PCI Express1. Two Dual-lane Internal PCIe Ports (IOI Proprietary)
o 10X2_19pin Header (Pitch=2.0mm)
o PCIe x2
2. Throughput of each lane
o PCIe Gen 2: 5 Gbps
3. Compliant with PCI Express Base Specification Revision 2.0
USB Features
• Compliant with USB 3.0 Specification Revision 1.0
• Compliant with Extensible Host Controller Interface (xHCI) Specification revision 1.0
• 16 downstream USB ports support SS/HS/FS/LS data rates (5Gbps/480Mbps/12Mbps/1.5Mbps)
• Supports UASP (USB Attached SCSI Protocol)
• Supports xHCI debug capability
• Support for Ultra High-performance isochronous applications
• Support for Latency Tolerance Tolerance Messaging (USB)
USB Data Transfer Rate
Low-speed (1.5 Mbps)
Full-speed (12.0 Mbps)
High-speed (480.0 Mbps)
Super-speed (5.0 Gbps)
Number of PortsSixteen USB 3.0 (Standard A-type Receptacle) cable ports (Provides USB 3.0 cable port lock mechanism)
USB Bus Power Input Either Big IDE 4-pin DC Power Connector
or/and SATA 15pin Power Connector
Physical Dimensions5.25" ODD Form Factor
146.6(W) x 42(H) x 109(D) mm
NW: 380g

 

  • Computer with PCI Express slot ( x8, x16)

Note:
For the best performance (5.0 Gbps), It should be installed in a PCIe Gen 2 compliant slot in the host computer.  Most computers have PCIe Gen 2 (5.0 Gbps) throughput on x8 or x16 slots.
A PCIe Gen 1 compliant slot reaches up to 2.5 Gbps throughput

 

 

  • If OS is Windows 8 or later , there are inbox driver for Fresco USB 3.0 Host Controller.
  • Linux xHCI support under Linux kernel version 2.6.31 and after
  • USB 3.0 Host Drivers
    x86 (32-bit) and x64 (64-bit)

    • Windows XP
    • Windows Vista
    • Windows 7
    • Windows 8 and 8.1

 

Driver Download

Version: 3.6.8.0
Content: USB 3.0 Host Controller Driver Kit (x86 and x64) For Windows XP, VISTA, 7, 8 and 8.1 Download

* Specifications subject to change without prior notice

Area Scan Camera Finder

Camera Finder

Click to search now

Line Scan Camera Finder

linescan Finder round 220 pix

Click to search now

Machine Vision Lens Finder

Click to search now

Machine Vision Lighting Finder

Click to search now