Baumer VAX.2-32M.I.NVN
The perfect image processing platform
Main > Product > Smart Camera > Baumer Smart Camera > VAX.2-32M.I.NVN
Baumer VAX.2-32M.I.NVN
The Highlight Features
- NVIDIA Jetson Nano or Xavier NX modules with special AI cores and graphics processors
- Cutting-edge Sony CMOS sensors
- Easy, space-saving, and cost effective integration
- Free choice of programming language thanks to Linux
- Fully flexible use of various image processing libraries and application programming interfaces (APIs)
- Compatible with GenICam
- M12 Ethernet and RS232 connections
- Slots for SD cards, HDMI, and USB
- Aluminum housing with C mount
- Integrated illumination controller with brightness ontrol
- 4 power outputs with max. 120 W (max. 48 V / 2.5 A)
- Wide range of thermally optimized accessories to achieve protection class IP 54, IP 65, and IP 67
- Auto exposure and Auto white balance
- Short exposure times from 1 µs
| Model Name | VAX.2-32M.I.NVN |
|---|---|
| Processor configuration | NVIDIA Jetson Nano |
| GPU data | 128 Core Maxwell GPU |
| CPU data | 4-Core ARM A57 |
| Memory RAM | 4 GB LPDDR4 |
| Memory Flash | 16 GB eMMC 5.1 |
| Sensor | Sony IMX265 Gen2 |
| Mono/Color | Mono |
| Sensor type | 1/1.8″ CMOS |
| Shutter type | Global shutter |
| Resolution | 2048 × 1536 px |
| Pixel size | 3.45 × 3.45 µm |
| Exposure time | 0.001 … 60000 ms |
| Dark noise | 2.03 e- |
| Saturation capacity | 9375 e- |
| Dynamic range | 70.8 dB |
| Signal-to-noise ratio | 39.7 dB |
| Quantum efficiency | 64.8 % @ 535 nm |
| Image formats, interface frame rate max. | Full Frame, 2048 × 1536 px, max. 55 fps Binning 2×2, 1024 × 768 px, max. 55 fps Binning 2×1, 1024 × 1536 px, max. 55 fps Binning 1×2, 2048 × 768 px, max. 55 fps |
| Image formats, aquisition frame rate max. (Burst Mode) | Full Frame, 2048 × 1536 px, max. 55 fps |
| Pixel formats | Mono8 Mono10 Mono12 Mono12 Packed |
| Analog controls | Gain (0 … 48 dB) Offset (0 … 255 LSB 12 Bit) |
| Color models | Mono |
| Auto Functions | Exposure Auto Gain Auto |
| Image Pre-processing | Image Flipping (X/Y) LUT / Gamma |
| Acquisition / Interface | Burst Mode Adjustable Framerate Short Exposure Time Enable Device Link Throughput Limit Internal Image Buffer |
| Synchronization | free running trigger |
| Trigger sources | Hardware Software ActionCommand |
| Trigger delay | 0 … 2 sec, tracking and buffering of up to 256 trigger signals |
| Process Synchronization | Events Timer Trigger Delay Debouncer Counter Sequencer Trigger via Action CMD (GigE) Additional Output Modes (e.g. Trigger Ready) PWM (PWM Duration / PWM Duty Cycle) 4 power outputs with up to 120 W (max. 48 V / 2.5 A) Selectable Output format (e.g. Tri State, Push Pull) Chunk data inside transferred image Encoder support via Counter End trigger source |
| Additional Functions | User Set Integrated temperature sensor Readable additional information (e.g. sensor information) Save Custom Data |
| Internal image buffer | 432 MB 48 images (Trigger Mode) 1 image (Free Running Mode) |
| Data interface | GigE USB 3.0 RS232 |
| Process interface | M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180) |
| Power supply | via M12/12 pins a-coded |
| Lens mount | C-mount |
| Dimension (mm) | 70 x 70 x 120.4 |
| Weight | ≤ 650 g |
| Material | aluminum, hard-anodized |
| Power consumption | approx. 13,2 W @ 55 fps |
| Operating temperature | 0 … +65 ° @ T = measurement point |
| Humidity | 10 … 90 % (non-condensing) |
| Protection class | IP 65 (with mounted tube and cable) IP 67 (with mounted tube and cable) |
| Lines | 1 input line 3 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A) |
| Output line sources | Off Exposure Active Timer1 Readout Active User0 User1 User2 TriggerReady |
| Conformity | CE RoHS |
