Main > Product > Area Scan camera > Firewire Cameras > Pike F-1600C
Pike F-1600C
The Pike F-1600B/C is a 16 Megapixel 1394b camera with exceptional image quality. It can be operated both with single tap and dual tap mode. At full resolution, it runs up to 3.1 fps (dual tap). Higher frame rates can be reached by a smaller AOI, binning (b/w), or sub-sampling.
Options
- 1394b connectors: 2 x copper (daisy chain) or 1 x GOF, 1 x copper, Hirose power: out
- Various IR cut/pass filters, various lens mounts
- Angled head, white medical housing
- High SNR mode (up to 24 dB better signal-to-noise ratio)
- Low-Noise Binning Mode
- Smear reduction
- Shading correction
- Defect pixel correction
- ROI, separate ROI for auto features
- Binning
- Decimation
- Auto gain (manual gain control: 0 to 24 dB)
- Auto exposure (129 µs to 67 s)
- Auto white balance
- LUT (look-up table)
- Hue, saturation, color correction
- Reverse X
- Deferred image transport
- Trigger programmable, level, single, bulk, programmable delay
- Sequence mode (changes the camera settings on the fly)
- SIS (secure image signature, time stamp for trigger, frame count etc.)
- Storable user sets
The Pike F-1600B/C is made for high-precision applications which require highest attention to detail. Its excellent image quality can be enhanced by several image pre-processing functions. It is also available with M42-Mount or with M58-Mount.
This camera is well-suited for:
- Science and research
- Metrology
- Document scanning (replaces DSLR cameras – no mechanical shutter, long life time)
- Healthcare and medical applications
- Industrial inspection at high resolutions
- Aerial imaging
- Very demanding OEM camera applications
- ITS (Intelligent traffic solutions)
- Long cables – 400 meters and more without additional repeaters (fiber version)
| Model Name | Pike F-1600B |
|---|---|
| Interface | IEEE 1394b - 800 Mb/s, 2 ports, daisy chain, fiber optic (GOF) optional |
| Resolution | 4872 × 3248 |
| Sensor | OnSemi KAI-16000 |
| Sensor type | CCD Progressive |
| Sensor size | Type 35 mm |
| Cell size | 7.4 µm |
| Lens mount | F |
| Frame rate | 3 fps |
| ADC | 14 Bit |
| On-board FIFO | 256 Mbyte |
| Bit depth | 8-14 Bit |
| Mono modes | Mono8, Mono12, Mono16 |
| Color modes RGB | RGB8 |
| Raw modes | Raw8, Raw12, Raw16 |
| Opto-isolated I/Os | 2 inputs, 4 outputs |
| RS-232 | 1 |
| Power requirements (DC) | 8 V - 36 V |
| Power consumption (@12 V) | 4 W |
| Mass | 380 g |
| Body dimensions (L × W × H in mm) | 142.8 × 59 × 59 mm including connectors, w/o tripod and lens |
| Regulations | CE, FCC Class B, RoHS |
