Leading Distributor for Machine Vision Components and Technologies in SEA

FireBird Quad CXP-12 3PE8


FireBird Quad CXP-12 3PE8

The FireBird Quad CXP-12 3PE8 frame grabber is one of the the latest members of Active Silicon’s state-of-the-art FireBird frame grabber family.

FireBird is designed for ultimate performance using Active Silicon’s proprietary DMA Engine technology, “ActiveDMA”. This technical innovation applies RISC based processor techniques and guarantees high speed, low latency image data transfers and zero CPU intervention.

The FireBird Quad CXP-12 3PE8 supports either one 4-link camera, two 2-link cameras, or up to four 1-link cameras, all up to CXP-12.

CoaXPress is a leading transmission standard for high-speed imaging in professional and industrial applications, just updated to include the faster CXP-10 and CXP-12 speeds. Each CoaXPress link supports up to 12.5 Gbps data rates, along with device power up to 13W and device control at up to 42 Mbps – all on a single coax cable. For faster devices, the links can be concatenated to provide multiples of the single coax bandwidth. Very long cable lengths are supported – up to 35m at 12.5 Gbps and 100m at 3.125 Gbps using Belden 1694A cable – or even longer lengths using thicker cables. Active Silicon was one of the primary authors of the CoaXPress international standard, which is hosted by the JIIA (Japan Industrial Imaging Association). All our CoaXPress products are certified compliant to the specification through the JIIA CoaXPress Product Certification Program.

FireBird is supported by Active Silicon’s software development kit, ActiveSDK. This is available as a separate item and allows rapid system development and integration. It provides comprehensive example applications and optimized libraries, and supports a variety of operating systems via a common API, including Windows, Linux (64-bit environments) and QNX. Drivers for third party applications are also available, such as Cognex VisionPro, HALCON, Common Vision Blox, StreamPix, LabVIEW etc.

Full GenICam support is included in the drivers and this includes a GenTL Producer for data streaming as well as register accesses. Additional to functions that control the hardware, the libraries include general purpose functions for the manipulation and display of images. A separate datasheet describes ActiveSDK in detail.

Other than this, Vital Vision provides a wide range of machine vision products. There is more than 2000 products for your different machine vision solution. To know more details, please direct to our sales person today !


The Highlight Features

  • CoaXPress v2.1 frame grabber.
  • Supports CoaXPress speeds up to CXP-12.
  • Fast PCI Express 8-lane Gen3 interface.
  • ActiveDMA engine – acquisition with zero CPU usage.
  • Comprehensive I/O including end bracket I/O.
  • Supports PoCXP (Power over CoaXPress).
  • Micro-BNC connectors.
  • Standard half-length PCI form-factor.
  • Full GenICam support (including GenTL Producer).
  • Supported by the proven ActiveSDK.
Vital Vision Pte Ltd logo 2022
Model NameFireBird Quad CXP-12 3PE8
CoaXPress InterfaceFour 75 Ohm Micro-BNC connectors (also known as HD-BNC) each operate at all CXP speeds up to 12.5 Gbps. Up to 17W is available to power cameras on each Micro-BNC via Power over CoaXPress (PoCXP), with 13W available at the camera according to the CoaXPress specification.

This FireBird Quad CXP-12 3PE8 supports one camera using all four links, two cameras each using two links, or up to four cameras each using one link, all up to CXP-12.

LEDs on the end bracket BNC show the link status according to the CoaXPress specification.
Buffer MemoryUp to 5 GBytes of DDR4 memory is fitted for buffering between the CoaXPress interface and the PCI Express bus.
PCI ExpressEight-lane Gen3 interface typically providing 6.8 Gbytes/sec transfer from FireBird to the PC, subject to PC performance
I/OThe following I/O lines are provided for triggers, optical shaft encoders, exposure control and general I/O:
• 4 opto-isolated inputs.
• 4 opto-isolated outputs.
• 4 TTL inputs, 5V tolerant.
• 4 TTL I/O, 5V logic.
• 4 RS-422 inputs.
• 4 RS-422 outputs.
All these I/O signals are provided on a 50-way header on the FireBird board.
A 15-way D-Type connector is located on the end panel bracket and allows access to a subset of the above I/O:
• 2 opto-isolated inputs.
• 3 TTL I/O, 5V logic.
• 2 RS-422 inputs.
• 1 RS-422 output.
Power InputAn 8-way PCI Express Graphics (PEG) connector is provided to connect to a 6- or 8-way PEG connector from the PC power supply. This is only needed for PoCXP
Fan ControllerThe fan speed is linked to the temperature of the FPGA die for optimum cooling and noise level.
PCI Express InterfacePCI Express Bus eight-lane Gen3 interface to Specification Revision 3.1, with a max payload size of 512 bytes.

The FireBird Quad CXP-12 3PE8 supports both Short (32-bit) and Long (64-bit) Address packets. It also generates Posted Writes for image data, thus achieving transfer rates up to 6.8 Gbytes/sec, subject to host performance
CoaXPressThe FireBird Quad CXP-12 3PE8 conforms to v2.1 of the CoaXPress specification
• CE-mark for compliance with EMC EN 55022:2010 (class A) and EN 55024:2010 in accordance with EU directive 2014/30/EU.
• RoHS compliance to RoHS3 directive 2015/863/EU.
• EMC FCC Class A.
The printed circuit board is manufactured by UL recognised manufacturers and has a flammability rating of 94V-0.
DimensionsPCB: 168mm by 111mm.
Overall: 181mm by 111mm.
Power Consumption (typical):(measured while acquiring from 4 CXP-12 links)

+3.3V: 80mA

+12V: 1220mA

+12V PEG connector: up to 68W for PoCXP
Storage Temperature-15ºC to +85ºC.
Operating Temperature0ºC to +60ºC.
Relative Humidity10% to 90% non-condensing (operating and storage).

Area Scan Camera Finder

Camera Finder

Click to search now

Line Scan Camera Finder

linescan Finder round 220 pix

Click to search now

Machine Vision Lens Finder

Click to search now

Machine Vision Lighting Finder

Click to search now