hr51MXGE
Easy and scalable integration, providing rich functionality with minimal design-in effort
hr51MXGE
The HR 10GigE series, equipped with top-notch high-resolution CCD and CMOS sensors, maximizes sensor bandwidth. With 10GigE technology, it can transmit image data at speeds up to 1.1 GB/s over distances of 100m. Its sleek design, complying with standards like GigE Vision, 10GigE Vision, and GenICam, ensures easy integration into your setup. Offering a wide range of industrial hardware and software features, including burst mode for higher trigger frequencies, it’s perfect for tasks such as optical metrology, surface control, quality control, or large area monitoring.
Technical Highlights:
- Defect pixel correction, lens shading correction
- ROI, LUT, binning, gamma, offset, auto exposure
- GenICam interface with GenTL driver
- Integrated multichannel LED strobe controller
- POE (Power Over Ethernet) single cable option
- Industrial TTL-24V I/O interface with SafeTrigger, programmable logic functions, sequencer and timer, RS232
- M58 lens interface (F-Mount optional)
| Model | hr51MXGE |
|---|---|
| Resolution [MP] | 51 MP |
| Resolution (h x v) | 8424 x 6032 px |
| Frame rate (max.) | 23.7 fps |
| Chroma | mono |
| Interface | 10GigE |
| (RJ-45) | |
| Sensor | |
| Sensor | GMAX4651 |
| Manufacturer | Gpixel |
| Sensor type | Area CMOS |
| Shutter type | global shutter |
| Sensor size (h x v) | 38.75 x 27.75 mm |
| Optical diagonal | 47.66 mm |
| Sensor format | 35mm Full Frame |
| Pixel size (h x v) | 4.6 x 4.6 µm |
| Camera | |
| Exposure modes | MANUAL;AUTO |
| Trigger modes | INTERNAL;SOFTWARE;EXTERNAL |
| Exposure time (min) | 17 µs |
| Exposure time (max) | 1 sec |
| Pixel format / max | mono8, mono12 / 12 bit |
| Gain modes | manual, auto |
| S/N ratio (max) | 42.6 dB (dep. on environment) |
| Dynamic range (max) | 65 dB (dep. on environment) |
| Internal memory | 512 MB SDRAM |
| Feature Set | |
| AOI | yes |
| LUT | yes |
| Offset | yes |
| Binning | yes |
| Image flip | yes |
| Shading correction | yes (external) |
| Defect pixel correction | yes |
| Sequencer | yes |
| POE | yes (POE+)(optional) |
| Housing | |
| Lens mount | M58x0.75 |
| Dimensions (w x h x d) | 70 x 70 x 76.8 mm |
| Weight | 380 g |
| Ambient temperature | -10 to 45 °C |
| Ambient humidity | 10 to 90 % (non-condensing) |
| Protection class | IP30 |
| Filter-/Coverglass | N-BK7 - AR coating 380-850nm |
| I/O-Interfaces | |
| Input up to 24V | 2 x |
| Input OPTO | 1 x |
| Output open drain | 4 x |
| I/O RS-232 | 1 x |
| Power supply | 10 to 25 V (DC) |
| Power consumption | 17 W (dep. on operating mode) |
