Main > Product > Line Scan Cameras > JAI Line Scan Camera > 4 Sensor RGB SWIR Line Scan Cameras > JAI SW-4010Q-MCL
JAI SW-4010Q-MCL
The JAI Sweep+ SW-4010Q-MCL is a prism-based industrial line scan camera with four image sensors. The camera allows for the simultaneous collection of red, green and blue image data on three separate CMOS sensors, plus a fourth sensor that collects image data from the Short Wave InfraRed (SWIR) spectrum using a sensor based on indium gallium arsenide (InGaAs) technology.
- 4-sensor prism-based line scan camera for simultaneous R-G-B plus SWIR imaging.
- 3 x CMOS sensors for detecting R-G-B visible light (400 ~ 700 nm)
- 1 x InGaAs sensor for detecting SWIR light (800 ~ 1700 nm).
- Xscale and ROI functions to synchronize sensor width and a line scan speed of the two different sensor types.
- Built-in colour space conversion (RGB channels only).
- Individual gain and shutter time settings for each channel.
- Dual-stream data output (RGB and SWIR in separate streams).
- Horizontal and vertical binning (for RGB sensors).
- Supports direct connection to rotary encoders when connecting via frame grabber is undesirable.
- Noise reduction filters.
- Flat shading correction (RGB & SWIR).
- Colour shading correction (RGB).
- Mini-Camera Link interface.
- M-52 mount.
- Multispectral lens available (sold separately) optimized to maintain focus for visible and SWIR channels.
| Model | SW-4010Q-MCL |
|---|---|
| Scanning system | 3 CMOS + 1 InGaAs line sensors, prism-mounted |
| Active pixels | 3 x 4096 pixels (R, G, B), 1 x 1024 (SWIR) |
| Line rate | Up to 39.2 kHz (for 2048 RGB + 1024 SWIR) |
| Sensor width | 30.72 mm (R, G, B) / 25.6 mm (SWIR) |
| Pixel size | R, G, B sensors: 7.5 μm x 7.5 μm SWIR sensor: 25 μm x 25 μm |
| Pixel clock (Camera Link) | 42.5 / 63.75 / 85 MHz |
| Video output | Dual Camera Link Base Output 1. RGB8-bit (RGB10/12-bit with custom pixel format) 2. SWIR8/10/12-bit |
| Image scaling | Rescales RGB pixel size and line width. 25 μm @ 1024 px, 12.5 μm @ 2048 px, or user-defined. |
| Inputs (Trigger) | Camera Link, Opto in, TTL via 12-pin, 2 TTL via 10-pin |
| Outputs | 2 TTL via 12-pin, 2 TTL via 10-pin |
| Gain | Analog Base: 0 ~ 12 dB (RGB), -6 ~ +3 dB (SWIR) Dig. Master: 0 to +30 dB, R/B: -7.96 to +12 dB Dig. Individual: 0 to +36 dB (RGB) |
| Gamma | 0.45 to 1.0 (9 steps RGB, 1 step SWIR) or 257/256-point LUT |
| Image processing | PRNU/DSNU, black level, flat shading. Color shading & chromatic aberration correction (RGB channels) |
| Color space conversion (RGB channels) | RGB to HSI, RGB to XYZ (CIE), sRGB, Adobe RGB, or User Custom RGB |
| Exposure modes | No shutter, timed exposure (common/individ. RGB) |
| Electronic shutter | 3 μs at fastest line rate (RGB), 20.38 μs at fastest line rate (SWIR). Exposure time can be longer at slower line rates |
| Control interface | Camera Link, RS-232C |
| Lens mount | M52 mount (46.5 mm flange back) |
| Operating temp. (ambient) | -5°C to +45°C (20 to 80% non-condensing) |
| Storage temp. (ambient) | -25°C to +60°C (20 to 80% non condensing) |
| Vibration | 10G (20 Hz to 200 Hz, XYZ directions) |
| Shock | 50G |
| Regulations | CE (EN61000-6-2, EN61000-6-3) FCC Part 15 Class B, RoHS/WEEE |
| Power 12-pin | +12V to +24V DC ± 10% |
| Power consumption | 9.3 W typical @ +12V |
| Dimensions (H x W x L) | 90 mm x 90 mm x 120 mm (without connector and lens mount protrusions) |
| Weight | ~900 g |
