Main  >  Product  > Machine Vision Lighting Controller >   Falcon Lighting Controllers > LIC-VA

The LIC-VA is available in two versions:
– LIC-VA1 processes a trigger signal.
– LIC-VA2 processes 2 trigger signals and switches these to the same number of outputs.

The Highlight Features

The trigger signals can have 5V or 24V levels. The LIC-VA has switchover times between 2μs and 5μs. In spite of its short switchover times, the LIC-VA is able to control up to 48V and 10 ampere per output in strobe mode. The associated output voltage depends on the available input voltage. In strobe mode, the maximum switch-on time is hardware-limited to 100μs to protect the light against overheating. The switch between individual operating modes is implemented with jumpers. A simple potentiometer is arranged as an intensity control for each channel. Like the entire LIC series, the LIC-VA also features 120 kHz pulse width modulation to prevent brightness fluctuations in the image recording.

Main  >  Product  > Machine Vision Lighting Controller >   Falcon Lighting Controllers > LIC-VA