NIT SenS 1280
High Sensitivity SWIR camera
Main > Product > SWIR Cameras > SWIR Area Scan Cameras > SWIR Megapixels > SenS 1280
NIT SenS 1280
The Highlight Features
- Linear response mode: High sensitivity
- High QE InGaAs from 900nm to 1700nm
- SXGA resolution , 1280*1024 pixels
- Bad Pixels Replacement and
- Non Uniformity Correction
- USB3.0 & CamLink (July) interface
| Model Name | SenS 1280 | SenS 1280 (Smart) |
|---|---|---|
| Key features | NUC & BPR Selective line scanning Multi ROI: up to 8 vertically stacked blocks | On-board NUC & BPR Automatic Gain Control (Brightness/Contrast) Automatic Integration Time (AIT) GenICam compliant |
| Output | USB 3.0, CameraLink | CameraLink, HD-SDI, CxP |
| Dimensions | 58x58x70mm | 58x58x64/72mm |
| Weight | <400g | <400g |
| GUIs | NITVision | NITGenicamControlTool |
| SDKs (USB & GigE) | x86-64 & Arm64 (C++,C#, Python) | - |
| Sensor | NSC1901T-SI | |
| Material | InGaAs | |
| Resolution | 1280x1024 | |
| Pixel pitch | 10μm | |
| Spectral response | 0.9 to 1.7μm | |
| Dual response | Linear (CTIA) Low & High Gain | |
| Modes | ITR, CDS, ROI | |
| QE | >80% (LG) | |
| Frame rate | 60Hz full frame | |
| Partial Reading Mode | ROI, Selective line scanning | |
| Exposure time | 10μs - 500ms | |
| Trigger | Software or hardware 1x Trigger IN/OUTPUT 2x Programmable outputs Selectable delay |
|
| 12V | ||
| Dimension | 58x58x70mm | |
| Mount | C-Mount native | |
| ADC | 14 bits | |
| Operating Temp | -40°C to +71°C | |
