Toshiba Teli BU040MCG
Smallest in industry with new IP core technology
Main > Product > Area Scan camera > USB3 Cameras > Toshiba Teli USB3 Cameras > Teli BU040MCG
Toshiba Teli BU040MCG
The Toshiba Teli BU040M is an ultra-high-speed CMOS camera with a USB 5Gbps (USB 3.1 Gen1) interface. Featuring a 0.4-megapixel sensor, it achieves an impressive frame rate of up to 523 fps, making it ideal for high-speed industrial inspection, scientific imaging, and motion analysis applications.
Key Features
- High frame rate
- USB3.1 Gen1 (USB3.0) interface
- USB3 Vision Ver.1.0 conformity
- GenICam conformity Ver2.3
- IIDC2 Digital Camera Control Specification Ver.1.0.0
- e-CON Connector adoption
- Scalable
| Model | BU040MCG | BU040MCF |
|---|---|---|
| Interface | USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported) | |
| Pixels | 0.4M | |
| Imager | CMOS image sensor | |
| Imager model | IMX287LLR | |
| Resolution | 720(H) x 540(V) | |
| Frame rate | 523fps (Bayer 8bit) | |
| Pixel size | 6.9μm x 6.9μm | |
| Scanning area | 4.97mm(H) x 3.73mm(V) | |
| Image size | 1/2.9 type | |
| Aspect ratio | 4:3 | |
| Scanning | Progressive | |
| Electronic shutter method | MANUAL: Global shutter / Random Trigger Shutter: Global shutter | |
| Random Trigger Shutter Type | External Trigger / Software Trigger | |
| Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) | |
| Sequential Shutter | 16 entries (max) | |
| Exposure Time | MANUAL: 1.08μs to 13.31μs (Short exposure mode ON), 20μs to 16s (Short exposure mode OFF) AE: 20μs to 1s Random Trigger Shutter: 20μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode) |
|
| Synchronization System | Internal / Bus (USB) | |
| On-chip Color Filter | RGB primary color mosaic-on-tip color filter | |
| Optical glass/filter | Dust-proof glass | IR Cut Filter |
| Sensitivity | 2,300 lx (F5.6, 1/500s) | 2,500 lx (F5.6, 1/500s) |
| Minimum illuminance | 1 lx (F1.4, Gain: +36dB, Video level: 50%) | 3 lx (F1.4, Gain: +36dB, Video level: 50%) |
| Gain | MANUAL: 0 to +36dB, AGC: 0 to +24dB | |
| Black Level | -25% to +25% | |
| Gamma / LUT | γ=1.0 to 0.45 / In 12bit, Out 12bit | |
| White balance | Manual white-balance / One-push white-balance | |
| Image Buffer | 256MB / 690 frames (all pixels readout) | |
| Image Output Format | RGB 24bit, BGR 24bit, YUV422 16bit, YUV411 12bit, Bayer 8bit / Bayer 10bit / Bayer 12bit, Mono 8bit |
|
| Readout Mode | All pixel, Scalable, Binning, Decimation, Mirroring, Flip | |
| External trigger input | Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum) |
|
| Power supply | DC5V ±5% | |
| Power consumption | 3.2W max. | |
| Lens mount | C-mount | |
| External dimension | 29(W) x 29(H) x 16(D) mm (Not including protruding parts) | |
| Mass | approx. 33g | |
| Operation temperature | 0°C to 40°C (below 60°C on cabinet surface) | |
| Operation humidity | 10% to 90% (no condensation) | |
| Conformity | CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2 | |
