Main > Product > Area Scan camera > USB3 Cameras > Toshiba Teli USB3 Cameras > Teli BU160MCF
Toshiba Teli BU160MCF
This BU series is an integrated-(one-body)-type camera that adopts all pixel data readout inter line CCD or CMOS.For video output and camera control, the USB3.1 Gen1 (USB3.0) interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
Key Features
- High frame rate
- USB3.1 Gen1 (USB3.0) interface
- USB3 Vision Ver.1.0 conformity
- GenICam conformity Ver2.3
- IIDC2 Digital Camera Control Specification Ver.1.0.0
- e-CON Connector adoption
- Scalable
| Model | BU160MCG | BU160MCF |
|---|---|---|
| Interface | USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported) | |
| Pixels | 1.6M | |
| Imager | CMOS image sensor | |
| Imager model | IMX273LLR | |
| Resolution | 1,440(H) x 1,080(V) | |
| Frame rate | 240fps (Bayer 8bit) | |
| Pixel size | 3.45μm x 3.45μm | |
| Scanning area | 4.97mm(H) x 3.73mm(V) | |
| Image size | 1/2.9 type | |
| Aspect ratio | 4:3 | |
| Scanning | Progressive | |
| Electronic shutter method | MANUAL: Global shutter / Random Trigger Shutter: Global shutter | |
| Random Trigger Shutter Type | External Trigger / Software Trigger | |
| Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) | |
| Sequential Shutter | 16 entries (max) | |
| Exposure Time | MANUAL: 1.08μs to 13.31μs (Short exposure mode ON), 20μs to 16s (Short exposure mode OFF) AE: 20μs to 1s Random Trigger Shutter: 20μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode) |
|
| Synchronization System | Internal / Bus (USB) | |
| On-chip Color Filter | RGB primary color mosaic-on-tip color filter | |
| Optical glass/filter | Dust-proof glass | IR Cut Filter |
| Sensitivity | 2,300 lx (F2.8, 1/250s) | 2,400 lx (F2.8, 1/250s) |
| Minimum illuminance | 1 lx (F1.4, Gain: +36dB, Video level: 50%) | 3 lx (F1.4, Gain: +36dB, Video level: 50%) |
| Gain | MANUAL: 0 to +36dB, AGC: 0 to +24dB | |
| Black Level | -25% to +25% | |
| Gamma / LUT | γ=1.0 to 0.45 / In 12bit, Out 12bit | |
| White balance | Manual white-balance / One-push white-balance | |
| Image Buffer | 256MB / 172 frames (all pixels readout) | |
| Image Output Format | RGB 24bit, BGR 24bit, YUV422 16bit, YUV411 12bit,Bayer 8bit / Bayer 10bit / Bayer 12bit, Mono 8bit | |
| Readout Mode | All pixel, Scalable, Binning, Decimation, Mirroring, Flip | |
| External trigger input | Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum) |
|
| Power supply | DC5V ±5% | |
| Power consumption | 3.4W max. | |
| Lens mount | C-mount | |
| External dimension | 29(W) x 29(H) x 16(D) mm (Not including protruding parts) | |
| Mass | approx. 33g | |
| Operation temperature | 0°C to 40°C (below 60°C on cabinet surface) | |
| Operation humidity | 10% to 90% (no condensation) | |
| Conformity | CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2 | |
