Toshiba Teli DDU1607MG
The world First Dual USB3 industrial camera.


Main > Product > Area Scan camera > USB3 Cameras > Toshiba Teli USB3 Cameras > Teli DDU1607MG
Toshiba Teli DDU1607MG

Based on the highly acclaimed Toshiba Teli’s own USB3 IP Core, the Dual USB3 DDU series doubled the bandwidth of USB3.
With 10Gbps bandwidth, the Toshiba Teli’s DDU Series is able to achieve higher speed with new generation of CMOS sensors, yet keeping the cost lower than Frame Grabber Based solution.
It allows users to leverage on the existing wide variety of matured and stable accessories such as Standard/Robotic cables, repeaters and host adaptors while keeping the cost low and affordable with the same superb image quality.

Model Name | DDU1607MG |
---|---|
Interface | USB3.1 Gen1 (USB3.0) (Only SuperSpeed is supported) / 2 channels |
Pixels | 16M |
Imager | CMOS image sensor |
Imager model | XGS16000 |
Resolution | 4,000(H) x 4,000(V) |
Frame rate | 47fps (Dual USB, Mono 8bit) 23fps (Single USB, Mono 8bit) |
Pixel size | 3.2μm x 3.2μm |
Scanning area | 12.80mm(H) x 12.80mm(V) |
Image size | 1.1 type |
Aspect ratio | 1:1 |
Scanning | Progressive |
Electronic shutter method | MANUAL : Global shutter / Random Trigger Shutter : Global shutter |
Random Trigger Shutter Type | External Trigger / Software Trigger |
Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) |
Sequential Shutter | 16 entries (max) |
Exposure Time | MANUAL : 30μs to 16s Random Trigger Shutter : 30μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode) |
Synchronization System | Internal / Bus (USB) |
Optical glass/filter | Dust-proof glass |
Sensitivity | 2,700 lx (F8, 1/50s) |
Minimum illuminance | 6 lx (F1.4, Gain: x8, Video level: 50%) |
Gain | MANUAL : x1 to x8, AGC : x1 to x8 |
Black Level | -25% to +25% |
Gamma / LUT | γ=1.0 to 0.45 / In 12bit, Out 12bit |
Image Buffer | 256MB / 16 frames (all pixels readout) |
Image Output Format | Mono 8bit / Mono 10bit / Mono 12bit |
Readout Mode | All pixel, Scalable, Binning, Decimation, Mirroring, Flip |
External trigger input | Low: 0 to 0.5V, High: 2 to 24.0V High active / Low active, Pulse width: 50μs (minimum) |
Power supply | DC5V±5% |
Power consumption | 5.3W max. |
Lens mount | C-mount |
External dimension | 40(W) x 40(H) x 35(D) mm (Not including protruding parts) |
Mass | approx. 90g |
Operation temperature | -5°C to 45°C (below 60°C on cabinet surface) |
Operation humidity | 10% to 90% (no condensation) |
Conformity | CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2 |