fxo990MCX
High Sensitivity SWIR camera
Main > Product > SWIR Cameras > SWIR Area Scan Cameras > SWIR Megapixels > fxo990MCX
fxo990MCX
The SWIR cameras based on the EXO and FXO series offer an extremely wide usable spectral range of 400-1700nm with the Sony SenSWIR sensor. Highly efficient thermal management of the housing is the basis of the outstanding dynamic range and homogeneity of the image. The integrated 4-channel strobe controller supports complex illumination and analysis scenarios.
Technical Highlights:
- Switchable active cooling (FXO only)
- GenICam 3.0, GenTL
- Integrated 4-channel LED strobe controller
- I/O interface with 2xIN, 4xOUT, Opto and RS232
- programmable timer, logic functions and sequencer
- Two-Point NUC (Non Uniformity Correction) (new SDK SVCam Kit 2.5.13 needed)
| Model Name | fxo990MCX |
|---|---|
| Resolution [MP] | 1.3 MP |
| Resolution (h x v) | 1280 x 1024 px |
| Frame rate (max.) | 134 fps |
| Chroma | SWIR |
| Interface | CXP-12 with 1 Connection |
| (micro-BNC) | |
| Sensor | |
| Sensor | IMX990AABJ |
| Manufacturer | Sony |
| Sensor type | Area SWIR CMOS |
| Shutter type | global shutter |
| Sensor size (h x v) | 6.4 x 5.12 mm |
| Optical diagonal | 8.2 mm |
| Sensor format | 8.2mm (Typ 1/2) |
| Pixel size (h x v) | 5 x 5 µm |
| Camera | |
| Exposure modes | MANUAL;AUTO |
| Trigger modes | INTERNAL;SOFTWARE;EXTERNAL |
| Exposure time (min) | 28 µs |
| Exposure time (max) | 0.5 sec |
| Pixel format / max | mono8, mono12 / 12 bit |
| Gain modes | manual, auto |
| Dynamic range (max) | 57 dB (dep. on environment) |
| Internal memory | 1024 MB SDRAM, 256 MB Flash |
| Feature Set | |
| AOI | yes |
| LUT | yes |
| Offset | yes |
| Binning | yes |
| Image flip | yes |
| Two-Point NUC | yes |
| Defect pixel correction | yes |
| Sequencer | yes |
| PoCXP | yes |
| Dynamic HotPixel Correction | yes |
| Housing | |
| Lens mount | C-Mount |
| Dimensions (w x h x d) | 50 x 50 x 70.1 mm |
| Weight | 240 g |
| Operating temperature (housing) | -10 to 65 °C |
| Ambient humidity | 10 to 90 % (non-condensing) |
| Protection class | IP30 |
| I/O-Interfaces | |
| Input up to 24V | 2 x |
| Input OPTO | 1 x |
| Output open drain | 4 x |
| I/O RS-232 | 1 x |
| Power supply | 10 to 25 V (DC) |
| Power consumption | 7 W (dep. on operating mode) |
