fxo992MXGE-T
High Sensitivity SWIR camera

Main > Product > SWIR Cameras > SWIR Area Scan Cameras > SWIR Megapixels > fxo992MXGE-T
fxo992MXGE-T

The SWIR cameras based on the EXO and FXO series offer an extremely wide usable spectral range of 400-1700nm with the Sony SenSWIR sensor. Highly efficient thermal management of the housing is the basis of the outstanding dynamic range and homogeneity of the image. The integrated 4-channel strobe controller supports complex illumination and analysis scenarios.
Technical Highlights:
- Switchable active cooling (FXO only)
- GenICam 3.0, GenTL
- Integrated 4-channel LED strobe controller
- I/O interface with 2xIN, 4xOUT, Opto and RS232
- programmable timer, logic functions and sequencer
- Two-Point NUC (Non Uniformity Correction) (new SDK SVCam Kit 2.5.13 needed)

Model Name | fxo992MXGE-T |
---|---|
Resolution [MP] | 5.2 MP |
Resolution (h x v) | 2560 x 2048 px |
Frame rate (max.) | 132.6 fps |
Chroma | SWIR |
Interface | 10GigE |
(RJ-45) | |
Sensor | |
Sensor | IMX992-AABA (TEC) |
Manufacturer | Sony |
Sensor type | Area SWIR CMOS |
Shutter type | global shutter |
Sensor size (h x v) | 8.83 x 7.07 mm |
Optical diagonal | 11.31 mm |
Sensor format | 11.4mm |
Pixel size (h x v) | 3.45 x 3.45 µm |
Camera | |
Exposure modes | MANUAL;AUTO |
Trigger modes | INTERNAL;SOFTWARE;EXTERNAL |
Pixel format / max | mono8, mono12 / 12 bit |
Gain modes | manual, auto |
Internal memory | 1024 MB SDRAM, 256 MB Flash |
Feature Set | |
AOI | yes |
LUT | yes |
Offset | yes |
Binning | yes |
Image flip | yes |
Two-Point NUC | yes |
Defect pixel correction | yes |
Sequencer | yes |
Housing | |
Lens mount | C-Mount |
Dimensions (w x h x d) | 50 x 50 x 82.1 mm |
Weight | 240 g |
Operating temperature (housing) | -10 to 60 °C |
Protection class | IP30 |
I/O-Interfaces | |
Input up to 24V | 2 x |
Input OPTO | 1 x |
Output open drain | 4 x |
I/O RS-232 | 1 x |
Power supply | 10 to 25 V (DC) |
Power consumption | 13 W (dep. on operating mode) |