
Main > Product > Area Scan camera > GigE Cameras > Toshiba Teli GigE Cameras > Teli BG302LMG

| Model | BG302LMG |
|---|---|
| Interface | Gigabit Ethernet IEEE802.3ab (1000BASE-T) conformity |
| Pixels | 3.1M |
| Imager | CMOS image sensor |
| Imager model | IMX265LLR |
| Resolution | 2,048(H) x 1,536(V) |
| Frame rate | 36fps (Mono 8bit) |
| Pixel size | 3.45μm x 3.45μm |
| Scanning area | 7.07mm(H) x 5.30mm(V) |
| Image size | 1/1.8 type |
| Aspect ratio | 4:3 |
| Scanning | Progressive |
| Electronic shutter method | Global shutter |
| Random Trigger Shutter Type | External Trigger / Software Trigger |
| Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) |
| Sequential Shutter | 16 entries (max) |
| Exposure Time | MANUAL: 30μs to 16s AE: 30μs ~ 1s Random Trigger Shutter: 30μs to 16s (Edge or Bulk mode), 200μs to Trigger width (Level mode) |
| Synchronization System | Internal |
| Optical glass/filter | Dust-proof glass |
| Sensitivity | 3,850 lx (F11, 1/36s) |
| Minimum illuminance | 2 lx (F1.4, Gain: +24dB, Video level: 50%) |
| Gain | MANUAL: 0 to +24dB, AGC: 0 to +24dB |
| Black Level | -25% to +25% |
| Gamma / LUT | γ=1.0 to 0.45 / In 12bit, Out 12bit |
| Image Buffer | 64M Byte |
| Image Output Format | Mono 8bit / Mono 10bit / Mono 12bit |
| Readout Mode | All pixel, Scalable, Binning, Decimation, Mirroring, Flip |
| External trigger input | Low: 0 to 0.5V, High: 3.3 to 24.0V High active / Low active, Pulse width: 200μs (minimum) |
| Power supply | PoE / DC12V ±10% |
| Power consumption | PoE: 3.1W max. / DC12V: 2.6W max. |
| Lens mount | C-mount |
| External dimension | 29(W) x 29(H) x 40(D) mm (Not including protruding parts) |
| Mass | approx. 60g |
| Operation temperature | 0°C to 40°C (below 60°C on cabinet surface) |
| Operation humidity | 10% to 90% (no condensation) |
| Conformity | CE, FCC, RoHS, WEEE, GigE Vision, GenICam, IIDC2 |







