Toshiba Teli BC505LMCF
Integrated CMOS camera with a Camera Link interface.
Main > Product > Area Scan camera > Cameralink cameras > Toshiba Teli Camera Link Cameras > Toshiba Teli BC505LMCF
Toshiba Teli BC505LMCF
BC505LM Series is an integrated CMOS camera with a Camera Link interface.
For video output, camera control and power, the Camera Link interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
| Model | BC505LMCG | BC505LMCF |
|---|---|---|
| Interface | Camera Link (PoCL) Base Configuration | |
| Pixels | 5M | |
| Imager | CMOS image sensor | |
| Imager model | IMX264LQR | |
| Resolution | 2448(H) x 2048(V) | |
| Frame rate | 36fps (Bayer8, 3tap, 83MHz) 32.6fps (Bayer8, 2tap, 83MHz) |
|
| Pixel size | 3.45μm x 3.45μm | |
| Scanning area | 8.45mm(H) x 7.07mm(V) | |
| Image size | 2/3 type | |
| Aspect ratio | 6:5 | |
| Scanning | Progressive | |
| Electronic shutter method | Global shutter | |
| Random Trigger Shutter Type | External Trigger / Software Trigger | |
| Random Trigger Shutter Mode | Edge / Level | |
| Sequential Shutter | 16 entries (max) | |
| Exposure Time | MANUAL: 30μs to 16s AE: 30μs ~ 1s Random Trigger Shutter: 30μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode) |
|
| Synchronization System | Internal | |
| On-chip Color Filter | RGB primary color mosaic-on-tip color filter | |
| Optical glass/filter | Dust-proof glass (AR coating) | IR Cut Filter (AR coating) |
| Sensitivity | 1,150 lx (F5.6, 1/32.62s) | 1,400 lx (F5.6, 1/32.62s) |
| Minimum illuminance | 3 lx (F1.4, Gain: +24dB, Video level: 50%) |
|
| Gain | MANUAL: 0 to +24dB, AGC: 0 to +24dB | |
| Black Level | -25% to +25% | |
| Gamma / LUT | γ=1.0 to 0.45 / In 12bit, Out 12bit | |
| White balance | Manual white-balance / One-push white-balance | |
| Pixel Clock | 41.5MHz / 64MHz / 83MHz | |
| Tap Number | 1 / 2 / 3 tap(s) | |
| Image Output Format | Bayer 8bit / Bayer 10bit / Bayer 12bit | |
| Readout Mode | All pixel, Scalable, Binning, Decimation, Mirroring, Flip | |
| External trigger input | Camera Link I/F, I/O connector High active / Low active, Pulse width: 50μs (minimum) |
|
| GPIO Input Output | In: 1 channel, In/Out: 1 channel (selectable), Out: 1 channel | |
| Communication Protocol | Legacy, GenCP-IIDC2 mode | |
| Baud Rate | 9,600bps / 115,200bps / 921,600bps | |
| Power supply | DC+12V ±10% (PoCL) | |
| Power consumption | 2.2W以下 | |
| Lens mount | C-mount | |
| External dimension | 29(W) x 29(H) x 26.5(D) mm (Not including protruding parts) | |
| Mass | approx. 44g | |
| Operation temperature | -5°C to 45°C (below 65°C on cabinet surface) | |
| Operation humidity | 90% or less (no condensation) | |
| Conformity | CE, FCC, RoHS, WEEE, Camera Link, PoCL, GenCP, IIDC2 | |
