Toshiba Teli DDU2607MCF
The world First Dual USB3 industrial camera
Main > Product > Area Scan camera > USB3 Cameras > Toshiba Teli USB3 Cameras > Toshiba Teli DDU2607MCF
Toshiba Teli DDU2607MCF
Based on the highly acclaimed Toshiba Teli’s own USB3 IP Core, the Dual USB3 DDU series doubled the bandwidth of USB3.
With 10Gbps bandwidth, the Toshiba Teli’s DDU Series is able to achieve higher speed with new generation of CMOS sensors, yet keeping the cost lower than Frame Grabber Based solution. It allows users to leverage on the existing wide variety of matured and stable accessories such as Standard/Robotic cables, repeaters and host adaptors while keeping the cost low and affordable with the same superb image quality
| Model | DDU2607MCG | DDU2607MCF |
|---|---|---|
| Interface | USB 5Gbps (USB3.1 Gen1) (Only SuperSpeed is supported) / 2 channels | |
| Pixels | 26.2M | |
| Imager | CMOS image sensor | |
| Imager model | GMAX0505 | |
| Resolution | 5,120(H) x 5,120(V) | |
| Frame rate | 28.4fps (Dual USB, Bayer 8bit) 14.4fps (Single USB, Bayer 8bit) |
|
| Pixel size | 2.5μm x 2.5μm | |
| Scanning area | 12.80mm(H) x 12.80mm(V) | |
| Image size | 1.1 type | |
| Aspect ratio | 1:1 | |
| Scanning | Progressive | |
| Electronic shutter method | MANUAL: Global shutter / Random Trigger Shutter: Global shutter | |
| Random Trigger Shutter Type | External Trigger / Software Trigger | |
| Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) | |
| Sequential Shutter | 16 entries (max) | |
| Exposure Time | MANUAL: 25μs to 16s AE: 25μs to 1s Random Trigger Shutter: 25μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode) |
|
| Synchronization System | Internal / Bus (USB) | |
| On-chip Color Filter | RGB primary color mosaic-on-tip color filter | |
| Optical glass/filter | Dust-proof glass | IR Cut Filter |
| Sensitivity | 2,040 lx (F8, 1/28.6s) | 2,470 lx (F8, 1/28.6s) |
| Minimum illuminance | 2 lx (F1.4, Digital Gain: x8, Analog Gain: x2, Video level: 50%) | 3 lx (F1.4, Digital Gain: x8, Analog Gain: x2, Video level: 50%) |
| Digital Gain | MANUAL: x1 to x8, AGC: x1 to x8 | |
| Analog Gain | MANUAL: x1 to x2 | |
| Black Level | -25% to +25% | |
| Gamma / LUT | γ=1.0 to 0.45 / In 12bit, Out 12bit | |
| White balance | Manual white-balance / One-push white-balance | |
| Image Buffer | 256MB / 10 frames (all pixels readout) | |
| Image Output Format | Bayer 8bit / Bayer 10bit / Bayer 12bit | |
| Readout Mode | All pixel, Scalable, Binning, Decimation, Mirroring, Flip | |
| External trigger input | Low: 0 to 0.5V, High: 2 to 24.0V | |
| High active / Low active, Pulse width: 50μs (minimum) | CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2 | |
| Power supply | DC5V ±5% | |
| Power consumption | 5.6W max. | |
| Lens mount | C-mount | |
| External dimension | 40(W) x 40(H) x 35(D) mm (Not including protruding parts) | |
| Mass | approx. 90g | |
| Operation temperature | -5°C to 45°C (below 60°C on cabinet surface) | |
| Operation humidity | 10% to 90% (no condensation) | |
| Conformity | CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2 | |
